ABLIC U.S.A. Inc.
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
S-80815CNY-Z2-U
Zobrazit detail DataSheets

S-80815CNY-Z2-U

Product Overview

Category

S-80815CNY-Z2-U belongs to the category of electronic components.

Use

This product is commonly used in electronic circuits for voltage detection and reset functions.

Characteristics

  • Voltage detection range: 1.5V to 6.0V
  • Low supply current: 1.0µA (typical)
  • Reset output type: N-channel open drain
  • Operating temperature range: -40°C to +85°C
  • Lead-free package: SOT-23-5L

Package

The S-80815CNY-Z2-U is packaged in a small SOT-23-5L package, which is suitable for surface mount applications.

Essence

The essence of S-80815CNY-Z2-U lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.

Packaging/Quantity

This product is typically available in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Supply voltage range: 1.5V to 6.0V
  • Detection voltage accuracy: ±2%
  • Quiescent current: 1.0µA (typical), 3.0µA (maximum)
  • Output voltage: VDD - 0.1V (typical)
  • Output leakage current: 1.0µA (maximum)
  • Power-on reset delay time: 200ms (typical)

Detailed Pin Configuration

The S-80815CNY-Z2-U has five pins arranged as follows:

```

| | --| |-- |____| ```

Pin 1: GND (Ground) Pin 2: VDD (Supply Voltage) Pin 3: RESET (Reset Output) Pin 4: VSS (Ground) Pin 5: VIN (Voltage Input)

Functional Features

  • Voltage detection: The S-80815CNY-Z2-U can accurately detect voltage levels within the specified range.
  • Reset function: It provides a reset signal when the detected voltage falls below the threshold.
  • Low power consumption: The product has a low quiescent current, making it suitable for battery-powered applications.
  • Open drain output: The reset output is of N-channel open drain type, allowing flexibility in interfacing with other components.

Advantages and Disadvantages

Advantages

  • Wide voltage detection range
  • Accurate voltage detection
  • Low power consumption
  • Small package size
  • Lead-free packaging

Disadvantages

  • Limited pin configuration options
  • Not suitable for high voltage applications

Working Principles

The S-80815CNY-Z2-U operates by continuously monitoring the input voltage. When the voltage falls below the detection threshold, the reset output is activated, indicating a low voltage condition. This can be used to trigger a system reset or perform other necessary actions.

Detailed Application Field Plans

The S-80815CNY-Z2-U finds applications in various electronic systems where voltage monitoring and reset functions are required. Some potential application fields include:

  1. Battery-powered devices: Used to monitor battery voltage and initiate a reset when the battery level is low.
  2. Microcontroller systems: Provides a reliable reset signal during power-up or voltage fluctuations.
  3. Industrial control systems: Ensures proper operation by monitoring critical voltage levels and initiating corrective actions if necessary.
  4. Automotive electronics: Used for voltage monitoring and reset functions in automotive systems.

Detailed and Complete Alternative Models

  1. S-80815ANY-Z2-T: Similar to S-80815CNY-Z2-U but with an active-high reset output.
  2. S-80815BNY-Z2-T: Provides a wider voltage detection range of 0.9V to 6.0V.
  3. S-80815DNY-Z2-T: Offers a higher accuracy of ±1% for voltage detection.

These alternative models provide similar functionality with slight variations in specifications, catering to different application requirements.

Word count: 529 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací S-80815CNY-Z2-U v technických řešeních

Sure! Here are 10 common questions and answers related to the application of S-80815CNY-Z2-U in technical solutions:

  1. Q: What is S-80815CNY-Z2-U? A: S-80815CNY-Z2-U is a voltage detector IC (integrated circuit) manufactured by a specific company.

  2. Q: What is the purpose of S-80815CNY-Z2-U in technical solutions? A: The purpose of S-80815CNY-Z2-U is to monitor and detect voltage levels in electronic circuits or systems.

  3. Q: How does S-80815CNY-Z2-U work? A: S-80815CNY-Z2-U works by comparing the input voltage with a reference voltage and providing an output signal when the voltage crosses a certain threshold.

  4. Q: What is the voltage range that S-80815CNY-Z2-U can detect? A: S-80815CNY-Z2-U can detect voltages within a specific range, typically mentioned in the datasheet provided by the manufacturer.

  5. Q: Can S-80815CNY-Z2-U be used in both AC and DC circuits? A: Yes, S-80815CNY-Z2-U can be used in both AC and DC circuits as long as the voltage range falls within its specifications.

  6. Q: What are some typical applications of S-80815CNY-Z2-U? A: Some typical applications of S-80815CNY-Z2-U include power supply monitoring, battery management systems, and overvoltage protection circuits.

  7. Q: Is S-80815CNY-Z2-U suitable for automotive applications? A: Yes, S-80815CNY-Z2-U is often used in automotive applications due to its ability to monitor voltage levels and provide protection.

  8. Q: Can S-80815CNY-Z2-U be used in low-power devices? A: Yes, S-80815CNY-Z2-U is designed to operate with low power consumption, making it suitable for use in low-power devices.

  9. Q: Are there any specific precautions to consider when using S-80815CNY-Z2-U? A: It is important to follow the manufacturer's guidelines and datasheet recommendations regarding voltage limits, operating conditions, and ESD (electrostatic discharge) precautions.

  10. Q: Where can I find more information about S-80815CNY-Z2-U? A: You can find more detailed information about S-80815CNY-Z2-U in the datasheet provided by the manufacturer or by contacting their technical support team.