Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
S-80915CLMC-G6KT2U

S-80915CLMC-G6KT2U

Product Overview

Category

S-80915CLMC-G6KT2U belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

  • Voltage detection range: 1.5V to 6.0V
  • Accuracy: ±1.0%
  • Low supply current: 1.0μA (typical)
  • Reset output type: N-channel open-drain
  • Operating temperature range: -40°C to +85°C

Package

The S-80915CLMC-G6KT2U is available in a compact surface-mount package, specifically the SOT-23-5 package.

Essence

The essence of this product lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.

Packaging/Quantity

The S-80915CLMC-G6KT2U is typically packaged in reels, with 3,000 units per reel.

Specifications

  • Supply voltage range: 1.5V to 6.0V
  • Detection voltage options: 1.5V, 1.6V, 1.8V, 2.0V, 2.3V, 2.5V, 2.6V, 2.7V, 2.8V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 3.6V, 3.7V, 3.8V, 4.0V, 4.1V, 4.2V, 4.3V, 4.4V, 4.5V, 4.6V, 4.7V, 4.8V, 4.9V, 5.0V, 5.5V, and 6.0V
  • Reset output: Active low (reset signal is asserted when the detected voltage falls below the detection threshold)
  • Quiescent current: 1.0μA (typical), 2.0μA (maximum)
  • Output current capacity: 10mA (minimum)

Detailed Pin Configuration

The S-80915CLMC-G6KT2U has a total of five pins:

  1. VDD: Supply voltage input
  2. GND: Ground reference
  3. RESET: Open-drain reset output
  4. VIN: Voltage detection input
  5. NC: No connection (unused pin)

Functional Features

Voltage Detection

The S-80915CLMC-G6KT2U can accurately detect the voltage level applied to the VIN pin within the specified range. It compares the input voltage with an internal reference voltage and generates a reset signal when the voltage falls below the detection threshold.

Reset Output

The reset output is an open-drain type, which means it can be connected to other devices or circuits for system reset purposes. When the detected voltage drops below the detection threshold, the reset output is asserted low, indicating the need for a system reset.

Advantages and Disadvantages

Advantages

  • Wide voltage detection range
  • High accuracy
  • Low supply current consumption
  • Compact package size
  • Open-drain reset output for flexible integration

Disadvantages

  • Limited output current capacity (10mA minimum)
  • Requires an external pull-up resistor for proper operation

Working Principles

The S-80915CLMC-G6KT2U operates based on a voltage comparator circuit. It compares the input voltage with a reference voltage generated internally. When the input voltage falls below the detection threshold, the comparator triggers the reset output, indicating the need for a system reset.

Detailed Application Field Plans

The S-80915CLMC-G6KT2U finds applications in various electronic devices and systems that require voltage monitoring and reset functionality. Some potential application fields include:

  1. Microcontrollers and microprocessors
  2. Power management circuits
  3. Battery-powered devices
  4. Industrial control systems
  5. Automotive electronics
  6. Consumer electronics

Detailed and Complete Alternative Models

  1. S-80915CLMC-G6KT2U: The model described in this entry.
  2. S-80915CLMC-G6KT2G: Similar to the above model but with different packaging (SOT-23-5F).
  3. S-80915CLMC-G6KT2H: Similar to the above models but with a wider operating temperature range (-40°C to +105°C).

These alternative models offer similar voltage detection and reset functionalities, with slight variations in package type or operating temperature range.

(Note: This

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací S-80915CLMC-G6KT2U v technických řešeních

Sure! Here are 10 common questions and answers related to the application of S-80915CLMC-G6KT2U in technical solutions:

  1. Question: What is the S-80915CLMC-G6KT2U?
    Answer: The S-80915CLMC-G6KT2U is a voltage detector IC manufactured by SII Semiconductor Corporation.

  2. Question: What is the operating voltage range of S-80915CLMC-G6KT2U?
    Answer: The operating voltage range of S-80915CLMC-G6KT2U is from 1.0V to 6.0V.

  3. Question: What is the purpose of using S-80915CLMC-G6KT2U in technical solutions?
    Answer: S-80915CLMC-G6KT2U is commonly used as a voltage monitoring and detection component in various electronic devices and systems.

  4. Question: What is the output configuration of S-80915CLMC-G6KT2U?
    Answer: The S-80915CLMC-G6KT2U has an open-drain output configuration.

  5. Question: What is the quiescent current consumption of S-80915CLMC-G6KT2U?
    Answer: The quiescent current consumption of S-80915CLMC-G6KT2U is typically 1.0µA.

  6. Question: Can S-80915CLMC-G6KT2U be used for overvoltage protection?
    Answer: No, S-80915CLMC-G6KT2U is not designed for overvoltage protection. It is primarily used for voltage monitoring and detection.

  7. Question: What is the temperature range for operation of S-80915CLMC-G6KT2U?
    Answer: The temperature range for operation of S-80915CLMC-G6KT2U is from -40°C to +85°C.

  8. Question: Can S-80915CLMC-G6KT2U be used in automotive applications?
    Answer: Yes, S-80915CLMC-G6KT2U is suitable for automotive applications as it meets the AEC-Q100 Grade 2 standards.

  9. Question: What is the output voltage threshold accuracy of S-80915CLMC-G6KT2U?
    Answer: The output voltage threshold accuracy of S-80915CLMC-G6KT2U is ±1.0%.

  10. Question: Is S-80915CLMC-G6KT2U available in a surface-mount package?
    Answer: Yes, S-80915CLMC-G6KT2U is available in a compact SOT-23-5 surface-mount package.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.