S-80923CLMC-G6TT2U

Product Overview

Category

S-80923CLMC-G6TT2U belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

• Voltage detection range: 1.0V to 5.0V
• Low supply current: 1.0µA (typical)
• Reset output type: Active low
• Package type: SOT-23-5
• RoHS compliant

Package and Quantity

The S-80923CLMC-G6TT2U is available in a SOT-23-5 package. It is typically sold in reels containing 3,000 units.

Specifications

• Supply voltage range: 1.0V to 5.5V
• Operating temperature range: -40°C to +85°C
• Detection voltage accuracy: ±1.0%
• Quiescent current: 1.0µA (typical), 2.0µA (maximum)
• Output leakage current: 1.0µA (maximum)
• Power-on reset time: 20ms (typical)

Pin Configuration

The S-80923CLMC-G6TT2U has a total of five pins arranged as follows:

```

---

| | --| |-- |____| ```

Pin 1: VDD (Supply voltage) Pin 2: GND (Ground) Pin 3: MR (Manual reset input) Pin 4: RESET (Reset output) Pin 5: VOUT (Voltage detection output)

Functional Features

1. Voltage Detection: The S-80923CLMC-G6TT2U can accurately detect voltages within the range of 1.0V to 5.0V.
2. Reset Output: It provides an active low reset signal, which can be used to reset the microcontroller or other connected devices.
3. Low Power Consumption: With a quiescent current of only 1.0µA, this IC minimizes power consumption in battery-powered applications.
4. Manual Reset Input: The MR pin allows for manual reset control, enabling users to initiate a reset when required.

Advantages and Disadvantages

Advantages

• Wide voltage detection range
• Low power consumption
• Compact SOT-23-5 package
• Accurate voltage detection
• RoHS compliant

Disadvantages

• Limited to voltage detection and reset functions only
• No built-in protection features

Working Principles

The S-80923CLMC-G6TT2U operates by continuously monitoring the input voltage. When the voltage falls below the detection threshold, the reset output is activated, indicating a low voltage condition. This signal can be used to trigger a reset sequence in the connected system, ensuring proper operation under low voltage conditions.

Detailed Application Field Plans

The S-80923CLMC-G6TT2U finds applications in various electronic devices where voltage monitoring and reset functionality are crucial. Some potential application fields include:

1. Battery-Powered Devices: Portable electronics such as smartphones, tablets, and wearables can benefit from the voltage detection and reset capabilities of this IC to ensure reliable operation and prevent data loss during low battery conditions.
2. Industrial Control Systems: In industrial automation and control systems, the S-80923CLMC-G6TT2U can be used to monitor power supply voltages and initiate system resets in case of voltage fluctuations or power failures.
3. Automotive Electronics: This IC can be employed in automotive applications to monitor battery voltage levels and trigger appropriate actions, such as shutting down non-essential systems to preserve battery life.

Detailed and Complete Alternative Models

1. S-80923CNMC-G6TT2U: Similar to the S-80923CLMC-G6TT2U, but with an active high reset output.
2. S-80923CLNB-G6TT2U: A variant with a different package type (SOT-89-5) for applications requiring higher power dissipation capabilities.
3. S-80923CLMC-G7TT2U: This model offers a wider voltage detection range of 0.9V to 5.5V, suitable for applications with lower voltage requirements.

These alternative models provide similar functionality to the S-80923CLMC-G6TT2U while offering slight variations in package type, reset output polarity, or voltage detection range.

In conclusion, the S-80923CLMC-G6TT2U is a versatile integrated circuit that provides accurate voltage detection and reset functions. Its low power consumption, compact package, and wide application field make it a valuable component in various electronic devices.