Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
AZ1084CD-3.3TRG1

AZ1084CD-3.3TRG1

Product Overview

Category

AZ1084CD-3.3TRG1 belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage Output: 3.3V
  • Maximum Input Voltage: 30V
  • Maximum Output Current: 5A
  • Dropout Voltage: 1.5V
  • Adjustable Output
  • Low Quiescent Current
  • Thermal Overload Protection
  • Short Circuit Protection

Package

AZ1084CD-3.3TRG1 is available in a TO-252 package, also known as DPAK (Plastic Package).

Essence

The essence of AZ1084CD-3.3TRG1 is to provide a stable and regulated output voltage for various electronic applications.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Output Voltage: 3.3V ±2%
  • Input Voltage Range: 4.5V - 30V
  • Line Regulation: 0.2% (typical)
  • Load Regulation: 0.4% (typical)
  • Dropout Voltage: 1.5V (typical)
  • Quiescent Current: 10mA (typical)
  • Ripple Rejection Ratio: 70dB (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

AZ1084CD-3.3TRG1 has three pins:

  1. Vin (Pin 1): Input voltage pin.
  2. Vout (Pin 2): Output voltage pin.
  3. GND (Pin 3): Ground pin.

Functional Features

  • Voltage Regulation: AZ1084CD-3.3TRG1 ensures a stable output voltage of 3.3V, regardless of input voltage fluctuations.
  • Adjustable Output: The output voltage can be adjusted using external resistors to meet specific application requirements.
  • Low Quiescent Current: The regulator consumes minimal current when the load is not drawing power, resulting in improved efficiency.
  • Thermal Overload Protection: The device incorporates thermal shutdown circuitry to prevent damage due to excessive heat.
  • Short Circuit Protection: AZ1084CD-3.3TRG1 includes built-in protection against short circuits, safeguarding the circuit and connected components.

Advantages and Disadvantages

Advantages

  • High output current capability (up to 5A).
  • Wide input voltage range.
  • Excellent line and load regulation.
  • Adjustable output voltage.
  • Thermal and short circuit protection.

Disadvantages

  • Dropout voltage of 1.5V may limit its use in low voltage applications.
  • Relatively high quiescent current compared to some other voltage regulators.

Working Principles

AZ1084CD-3.3TRG1 operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This allows it to maintain a constant output voltage despite variations in the input voltage or load conditions.

Detailed Application Field Plans

AZ1084CD-3.3TRG1 finds applications in various electronic systems that require a stable and regulated 3.3V power supply. Some common application fields include:

  1. Microcontroller Systems: Provides a reliable power source for microcontrollers, ensuring proper operation.
  2. Embedded Systems: Used to regulate voltage in embedded systems, preventing damage to sensitive components.
  3. Industrial Automation: Suitable for powering control circuits and sensors in industrial automation applications.
  4. Automotive Electronics: Used in automotive systems to regulate voltage for various electronic components.
  5. Power Supply Modules: Can be integrated into power supply modules to provide a regulated output voltage.

Detailed and Complete Alternative Models

  1. LM1117-3.3: A popular alternative with similar specifications and pin configuration.
  2. LT1084CP-3.3: Offers improved dropout voltage compared to AZ1084CD-3.3TRG1.
  3. TPS7A3301: Provides ultra-low dropout voltage and higher output current capability.

These alternative models offer similar functionality and can be considered based on specific application requirements.

In conclusion, AZ1084CD-3.3TRG1 is a voltage regulator that provides a stable 3.3V output voltage. It offers adjustable output, low quiescent current, and protection features. While it has some limitations, it finds applications in various fields and has alternative models available in the market.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací AZ1084CD-3.3TRG1 v technických řešeních

Sure! Here are 10 common questions and answers related to the application of AZ1084CD-3.3TRG1 in technical solutions:

Q1: What is the AZ1084CD-3.3TRG1? A1: The AZ1084CD-3.3TRG1 is a voltage regulator IC that provides a fixed output voltage of 3.3V.

Q2: What is the input voltage range for the AZ1084CD-3.3TRG1? A2: The input voltage range for the AZ1084CD-3.3TRG1 is typically between 5V and 20V.

Q3: What is the maximum output current of the AZ1084CD-3.3TRG1? A3: The maximum output current of the AZ1084CD-3.3TRG1 is 5A.

Q4: Can the AZ1084CD-3.3TRG1 be used in battery-powered applications? A4: Yes, the AZ1084CD-3.3TRG1 can be used in battery-powered applications as long as the input voltage is within the specified range.

Q5: Does the AZ1084CD-3.3TRG1 require any external components for operation? A5: Yes, the AZ1084CD-3.3TRG1 requires input and output capacitors for stability and proper operation.

Q6: Can the AZ1084CD-3.3TRG1 handle high temperatures? A6: Yes, the AZ1084CD-3.3TRG1 is designed to operate at high temperatures and has built-in thermal protection.

Q7: Is the AZ1084CD-3.3TRG1 suitable for low-power applications? A7: The AZ1084CD-3.3TRG1 is more suitable for medium to high-power applications due to its maximum output current of 5A.

Q8: Can the AZ1084CD-3.3TRG1 be used in automotive applications? A8: Yes, the AZ1084CD-3.3TRG1 is suitable for automotive applications as it meets the necessary requirements and standards.

Q9: What is the dropout voltage of the AZ1084CD-3.3TRG1? A9: The dropout voltage of the AZ1084CD-3.3TRG1 is typically around 1.5V.

Q10: Can multiple AZ1084CD-3.3TRG1 regulators be connected in parallel for higher output current? A10: Yes, multiple AZ1084CD-3.3TRG1 regulators can be connected in parallel to increase the overall output current capacity.

Please note that these answers are general and may vary depending on specific application requirements.