IDT, Integrated Device Technology Inc
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
74FCT162501ATPAG
Zobrazit detail DataSheets

Encyclopedia Entry: 74FCT162501ATPAG

Product Overview

Category

The 74FCT162501ATPAG belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital electronic systems for data storage and transfer applications.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with various logic families
  • Robust design for reliable performance

Package

The 74FCT162501ATPAG is available in a small outline package (SOP) or thin quad flat pack (TQFP) package.

Essence

This IC serves as a bidirectional transceiver, facilitating the transfer of data between different parts of a digital system.

Packaging/Quantity

The 74FCT162501ATPAG is typically packaged in reels or tubes, with a quantity of 250 units per package.

Specifications

  • Operating Voltage Range: 2.0V to 5.5V
  • Input/Output Compatibility: TTL, CMOS
  • Data Transfer Rate: Up to 200 MHz
  • Number of Channels: 16
  • Output Drive Strength: 24 mA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The 74FCT162501ATPAG features a total of 48 pins, arranged as follows:

  1. Pin 1: Output Enable (OE)
  2. Pin 2: GND (Ground)
  3. Pin 3: A1 (Input/Output)
  4. Pin 4: B1 (Input/Output)
  5. Pin 5: Y1 (Output)
  6. Pin 6: VCC (Power Supply)
  7. Pin 7: A2 (Input/Output)
  8. Pin 8: B2 (Input/Output)
  9. Pin 9: Y2 (Output)
  10. ... (continue with the remaining pins)

Functional Features

  • Bidirectional data transfer
  • Output enable control for tristate operation
  • Non-inverting outputs
  • High-speed operation for efficient data transmission
  • Wide operating voltage range for compatibility with various systems

Advantages and Disadvantages

Advantages

  • High-speed operation enables quick data transfer
  • Low power consumption for energy-efficient applications
  • Compatibility with different logic families allows for versatile use
  • Robust design ensures reliable performance in various environments

Disadvantages

  • Limited number of channels (16) may not be sufficient for certain applications requiring more extensive data transfer capabilities
  • Relatively higher cost compared to some alternative models

Working Principles

The 74FCT162501ATPAG operates based on the principles of digital logic circuits. It utilizes transistors and other electronic components to facilitate bidirectional data transfer between different parts of a digital system. The IC's internal circuitry ensures efficient and reliable data transmission.

Detailed Application Field Plans

The 74FCT162501ATPAG finds application in various digital systems, including but not limited to: - Computer motherboards - Networking equipment - Communication devices - Industrial automation systems - Consumer electronics

Detailed and Complete Alternative Models

  1. 74HC162501: Similar functionality, compatible with CMOS logic family.
  2. SN74LVTH162501: Lower power consumption, compatible with low-voltage TTL logic family.
  3. CDCLVC162501: Higher output drive strength, suitable for demanding applications.

These alternative models offer similar features and can be considered as substitutes for the 74FCT162501ATPAG depending on specific requirements.

In conclusion, the 74FCT162501ATPAG is a high-speed, bidirectional transceiver IC used in digital electronic systems. Its compatibility, reliability, and efficient data transfer make it suitable for various applications. However, its limited channel count and relatively higher cost should be considered when selecting alternatives.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací 74FCT162501ATPAG v technických řešeních

Sure! Here are 10 common questions and answers related to the application of 74FCT162501ATPAG in technical solutions:

  1. Q: What is the function of the 74FCT162501ATPAG? A: The 74FCT162501ATPAG is a 16-bit registered transceiver with tri-state outputs. It can be used for bidirectional data transfer between two buses.

  2. Q: What is the operating voltage range of the 74FCT162501ATPAG? A: The operating voltage range is typically between 4.5V and 5.5V.

  3. Q: Can the 74FCT162501ATPAG handle high-speed data transfer? A: Yes, it is designed to operate at high speeds and can support data rates up to 250 MHz.

  4. Q: How many bits can the 74FCT162501ATPAG handle? A: It is a 16-bit transceiver, meaning it can handle 16 bits of data simultaneously.

  5. Q: Does the 74FCT162501ATPAG have built-in output enable control? A: Yes, it has separate output enable (OE) pins for each direction, allowing individual control of the outputs.

  6. Q: Can the 74FCT162501ATPAG be used in both synchronous and asynchronous applications? A: Yes, it supports both synchronous and asynchronous operation modes.

  7. Q: What is the maximum propagation delay of the 74FCT162501ATPAG? A: The maximum propagation delay is typically around 3.5 ns.

  8. Q: Is the 74FCT162501ATPAG compatible with other logic families? A: Yes, it is designed to be compatible with TTL, LVTTL, and CMOS logic families.

  9. Q: Can the 74FCT162501ATPAG be used in hot-swapping applications? A: Yes, it has built-in bus-hold circuitry that allows for hot insertion and removal of cards without causing data corruption.

  10. Q: What are some typical applications for the 74FCT162501ATPAG? A: It can be used in various applications such as data communication systems, networking equipment, industrial control systems, and memory interfaces.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.