IDT, Integrated Device Technology Inc
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
74FCT163245CPAG
Zobrazit detail DataSheets

Encyclopedia Entry: 74FCT163245CPAG

Product Overview

Category

The 74FCT163245CPAG belongs to the category of integrated circuits (ICs) and specifically falls under the family of bus transceivers.

Use

This IC is commonly used for bidirectional data transfer between two buses with different voltage levels or signal formats. It acts as a bridge, allowing seamless communication between these buses.

Characteristics

  • Bidirectional data transfer
  • Supports different voltage levels or signal formats
  • High-speed operation
  • Low power consumption
  • Wide operating temperature range

Package

The 74FCT163245CPAG is available in a 48-pin plastic TSSOP (Thin Shrink Small Outline Package) package. This package offers good thermal performance and ease of handling during assembly.

Essence

The essence of the 74FCT163245CPAG lies in its ability to enable efficient and reliable data transfer between buses with varying voltage levels or signal formats.

Packaging/Quantity

The IC is typically supplied in reels or tubes, with each reel/tube containing a specific quantity of the 74FCT163245CPAG ICs. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Supply Voltage Range: 2.0V to 5.5V
  • Input Voltage Range: GND to VCC
  • Output Voltage Range: GND to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Data Rate: XX Mbps
  • Number of Channels: 16
  • Logic Family: FCT
  • RoHS Compliance: Yes

Detailed Pin Configuration

The 74FCT163245CPAG has a total of 48 pins, which are assigned specific functions. Here is a detailed pin configuration:

  1. Pin 1: A1 (Input/Output)
  2. Pin 2: A2 (Input/Output)
  3. Pin 3: A3 (Input/Output)
  4. Pin 4: A4 (Input/Output)
  5. Pin 5: A5 (Input/Output)
  6. Pin 6: A6 (Input/Output)
  7. Pin 7: A7 (Input/Output)
  8. Pin 8: A8 (Input/Output)
  9. Pin 9: A9 (Input/Output)
  10. Pin 10: A10 (Input/Output)
  11. Pin 11: A11 (Input/Output)
  12. Pin 12: A12 (Input/Output)
  13. Pin 13: A13 (Input/Output)
  14. Pin 14: A14 (Input/Output)
  15. Pin 15: A15 (Input/Output)
  16. Pin 16: GND (Ground)
  17. Pin 17: B1 (Input/Output)
  18. Pin 18: B2 (Input/Output)
  19. Pin 19: B3 (Input/Output)
  20. Pin 20: B4 (Input/Output)
  21. Pin 21: B5 (Input/Output)
  22. Pin 22: B6 (Input/Output)
  23. Pin 23: B7 (Input/Output)
  24. Pin 24: B8 (Input/Output)
  25. Pin 25: B9 (Input/Output)
  26. Pin 26: B10 (Input/Output)
  27. Pin 27: B11 (Input/Output)
  28. Pin 28: B12 (Input/Output)
  29. Pin 29: B13 (Input/Output)
  30. Pin 30: B14 (Input/Output)
  31. Pin 31: B15 (Input/Output)
  32. Pin 32: VCC (Power Supply)
  33. Pin 33: OEAB (Output Enable Input)
  34. Pin 34: DIR (Direction Control Input)
  35. Pin 35: OEA (Output Enable Input)
  36. Pin 36: GND (Ground)
  37. Pin 37: B16 (Input/Output)
  38. Pin 38: B17 (Input/Output)
  39. Pin 39: B18 (Input/Output)
  40. Pin 40: B19 (Input/Output)
  41. Pin 41: B20 (Input/Output)
  42. Pin 42: B21 (Input/Output)
  43. Pin 43: B22 (Input/Output)
  44. Pin 44: B23 (Input/Output)
  45. Pin 45: B24 (Input/Output)
  46. Pin 46: B25 (Input/Output)
  47. Pin 47: B26 (Input/Output)
  48. Pin 48: VCC (Power Supply)

Functional Features

The 74FCT

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací 74FCT163245CPAG v technických řešeních

Sure! Here are 10 common questions and answers related to the application of 74FCT163245CPAG in technical solutions:

  1. Q: What is the 74FCT163245CPAG? A: The 74FCT163245CPAG is a 16-bit bus transceiver with 3-state outputs, designed for bidirectional data communication between two buses.

  2. Q: What is the maximum operating voltage for this IC? A: The maximum operating voltage for the 74FCT163245CPAG is typically 5.5V.

  3. Q: Can I use this IC in both parallel and serial communication applications? A: Yes, the 74FCT163245CPAG can be used in both parallel and serial communication applications, depending on the configuration and connection.

  4. Q: What is the maximum data transfer rate supported by this IC? A: The maximum data transfer rate supported by the 74FCT163245CPAG is typically around 200 MHz.

  5. Q: Does this IC have built-in protection features against overvoltage or ESD events? A: Yes, the 74FCT163245CPAG has built-in protection features to guard against overvoltage and electrostatic discharge (ESD) events.

  6. Q: Can I connect multiple 74FCT163245CPAG ICs together to expand the number of bidirectional bus lines? A: Yes, you can connect multiple 74FCT163245CPAG ICs together to expand the number of bidirectional bus lines in your system.

  7. Q: Is this IC compatible with other logic families like TTL or CMOS? A: Yes, the 74FCT163245CPAG is compatible with various logic families, including TTL and CMOS, making it versatile for integration into different systems.

  8. Q: What is the power supply voltage range for this IC? A: The recommended power supply voltage range for the 74FCT163245CPAG is typically between 4.5V and 5.5V.

  9. Q: Can I use this IC in high-speed data transmission applications? A: Yes, the 74FCT163245CPAG is designed to support high-speed data transmission, making it suitable for such applications.

  10. Q: Are there any specific layout considerations or guidelines for using this IC? A: Yes, it is recommended to follow the layout guidelines provided in the datasheet of the 74FCT163245CPAG to ensure proper signal integrity and minimize noise interference.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always advisable to refer to the datasheet and consult with technical experts for accurate information.