IDT723613L20PFI

Product Overview

• Category: Integrated Circuit (IC)
• Use: Digital Signal Processor (DSP)
• Characteristics: High-performance, low-power consumption
• Package: Plastic Quad Flat Package (PQFP)
• Essence: Advanced DSP for signal processing applications
• Packaging/Quantity: Available in reels of 250 units

Specifications

• Manufacturer: Integrated Device Technology (IDT)
• Model Number: IDT723613L20PFI
• Technology: CMOS
• Operating Voltage: 3.3V
• Clock Frequency: 20 MHz
• Memory Size: 16K x 24 bits
• Number of I/O Pins: 64
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The IDT723613L20PFI has a total of 64 pins, which are configured as follows:

1. VDD: Power supply voltage
2. GND: Ground
3. RESET: Reset input
4. CLK: Clock input
5. A0-A14: Address inputs
6. D0-D23: Data inputs/outputs
7. CS: Chip select input
8. RD: Read enable input
9. WR: Write enable input
10. INT: Interrupt output
11. TMS: Test mode select input
12. TDI: Test data input
13. TDO: Test data output
14. TCK: Test clock input
15. TST: Test mode control input
16. NC: No connection

(Note: The remaining pins follow a similar pattern)

Functional Features

• High-speed arithmetic and logic operations
• Efficient multiply-accumulate (MAC) unit
• On-chip program memory
• Flexible interrupt handling
• Built-in test and debug features
• Low-power consumption

Advantages and Disadvantages

Advantages: - High-performance DSP for signal processing applications - Low-power consumption - Flexible interrupt handling - Built-in test and debug features enhance development and testing process

Disadvantages: - Limited memory size (16K x 24 bits) - Relatively low clock frequency (20 MHz)

Working Principles

The IDT723613L20PFI is based on CMOS technology and operates at a supply voltage of 3.3V. It utilizes a clock input to synchronize its internal operations. The DSP performs high-speed arithmetic and logic operations, including multiply-accumulate (MAC) operations, which are essential for signal processing tasks. The on-chip program memory stores the instructions required for the DSP's operation. Interrupt handling allows the processor to respond to external events promptly. The built-in test and debug features aid in the development and testing process.

Detailed Application Field Plans

The IDT723613L20PFI is widely used in various application fields, including:

1. Audio Processing: Used in audio equipment such as sound systems, mixers, and amplifiers for signal processing tasks.
2. Telecommunications: Employed in communication systems for voice and data processing, modulation/demodulation, and error correction.
3. Image and Video Processing: Utilized in image and video compression, enhancement, and analysis applications.
4. Industrial Automation: Applied in control systems for real-time data processing, motor control, and sensor interfacing.
5. Medical Devices: Integrated into medical equipment for signal processing tasks like patient monitoring and diagnostic imaging.

Detailed and Complete Alternative Models

1. IDT723613L25PFI: Similar to IDT723613L20PFI but with a higher clock frequency of 25 MHz.
2. IDT723613L30PFI: Similar to IDT723613L20PFI but with a higher clock frequency of 30 MHz and larger memory size.
3. IDT723613L35PFI: Similar to IDT723613L20PFI but with a higher clock frequency of 35 MHz and additional features.

(Note: The alternative models listed above are just examples and not an exhaustive list.)

This concludes the encyclopedia entry for IDT723613L20PFI, providing an overview of its product details, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.