Viz Specifikace pro podrobnosti o produktu.
ADM6996LAAT1
Basic Information Overview
- Category: Integrated Circuit (IC)
- Use: Networking and Communication
- Characteristics: High-speed Ethernet switch controller
- Package: QFP (Quad Flat Package)
- Essence: Provides advanced switching capabilities for network devices
- Packaging/Quantity: Single unit per package
Specifications
- Manufacturer: Analog Devices
- Model Number: ADM6996LAAT1
- Technology: CMOS (Complementary Metal-Oxide-Semiconductor)
- Supply Voltage: 3.3V
- Operating Temperature Range: -40°C to +85°C
- Data Rate: Up to 100 Mbps
- Number of Ports: 6
- Interface: MII (Media Independent Interface)
- Power Consumption: Low power consumption
Detailed Pin Configuration
The ADM6996LAAT1 has a total of 128 pins. The pin configuration is as follows:
| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VDD | Power supply voltage | | 2 | VSS | Ground | | 3 | TXD[0] | Transmit data bit 0 | | 4 | TXD[1] | Transmit data bit 1 | | ... | ... | ... | | 127 | RXD[5] | Receive data bit 5 | | 128 | RXD[6] | Receive data bit 6 |
Functional Features
- Advanced switching capabilities
- Support for VLAN (Virtual Local Area Network) tagging
- Quality of Service (QoS) support for prioritizing traffic
- Auto-negotiation for link speed and duplex mode
- Built-in address learning and aging mechanism
- Broadcast storm protection
- Jumbo frame support
Advantages and Disadvantages
Advantages: - High-speed Ethernet switching - Support for VLAN tagging and QoS - Low power consumption
Disadvantages: - Limited number of ports (6) - Limited data rate (up to 100 Mbps)
Working Principles
The ADM6996LAAT1 is a high-speed Ethernet switch controller that operates based on the principles of packet switching. It receives incoming packets from different network devices, examines their destination addresses, and forwards them to the appropriate output port. The switch controller also performs address learning and aging to maintain a table of MAC addresses associated with each port.
Detailed Application Field Plans
The ADM6996LAAT1 is commonly used in networking and communication equipment such as Ethernet switches, routers, and hubs. It is suitable for small to medium-sized networks where high-speed switching and advanced features like VLAN tagging and QoS are required.
Detailed and Complete Alternative Models
- ADM6996L: Similar to ADM6996LAAT1 but with different package options (e.g., LQFP)
- ADM6996M: Higher-performance version with additional features (e.g., Gigabit Ethernet support)
- ADM6996S: Lower-cost version with reduced functionality (e.g., fewer ports)
Note: This entry provides a brief overview of the ADM6996LAAT1. For more detailed information, please refer to the manufacturer's datasheet or product documentation.
Word Count: 320
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací ADM6996LAAT1 v technických řešeních
Sure! Here are 10 common questions and answers related to the application of ADM6996LAAT1 in technical solutions:
Q1: What is ADM6996LAAT1? A1: ADM6996LAAT1 is a specific model of Ethernet switch manufactured by Analog Devices. It is commonly used in networking and technical solutions.
Q2: What are the key features of ADM6996LAAT1? A2: Some key features of ADM6996LAAT1 include high-speed data transfer, multiple ports for connecting devices, support for various network protocols, and advanced management capabilities.
Q3: How many ports does ADM6996LAAT1 have? A3: ADM6996LAAT1 typically has 24 ports, allowing for the connection of multiple devices in a network.
Q4: What types of networks can ADM6996LAAT1 be used in? A4: ADM6996LAAT1 can be used in various types of networks, including local area networks (LANs), wide area networks (WANs), and metropolitan area networks (MANs).
Q5: Does ADM6996LAAT1 support Power over Ethernet (PoE)? A5: No, ADM6996LAAT1 does not support Power over Ethernet. It is primarily designed for data transfer rather than providing power to connected devices.
Q6: Can ADM6996LAAT1 be managed remotely? A6: Yes, ADM6996LAAT1 supports remote management through various protocols such as Simple Network Management Protocol (SNMP) and Telnet.
Q7: What is the maximum data transfer speed supported by ADM6996LAAT1? A7: ADM6996LAAT1 supports high-speed data transfer up to 1 Gigabit per second (Gbps) on each port.
Q8: Is ADM6996LAAT1 compatible with different network protocols? A8: Yes, ADM6996LAAT1 is compatible with various network protocols such as Ethernet, Fast Ethernet, and Gigabit Ethernet.
Q9: Can ADM6996LAAT1 be used in a stackable configuration? A9: No, ADM6996LAAT1 is not designed to be stacked. It is typically used as a standalone switch in a network infrastructure.
Q10: What are some common applications of ADM6996LAAT1? A10: Some common applications of ADM6996LAAT1 include building local area networks for offices, schools, data centers, and other environments where multiple devices need to be connected and managed efficiently.
Please note that the specific details and capabilities of ADM6996LAAT1 may vary, so it's always recommended to refer to the manufacturer's documentation for accurate information.