Infineon Technologies
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
BCR08PNH6433XTMA1
Zobrazit detail DataSheets

BCR08PNH6433XTMA1

Product Overview

Category

The BCR08PNH6433XTMA1 belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Thermal shutdown protection
  • Overcurrent protection

Package

The BCR08PNH6433XTMA1 comes in a small outline package (SOP) for surface mount applications.

Essence

The essence of this product lies in its ability to provide stable and reliable voltage regulation in various electronic devices.

Packaging/Quantity

It is typically packaged in reels containing a specific quantity, such as 2500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 1.2V to 20V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 300mV at 100mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The BCR08PNH6433XTMA1 has a standard pin configuration with input, output, ground, and enable pins. The pinout is as follows: 1. VIN (Input Voltage) 2. VOUT (Output Voltage) 3. GND (Ground) 4. EN (Enable)

Functional Features

  • Voltage Regulation: The device ensures a stable output voltage even with fluctuations in the input voltage.
  • Overcurrent Protection: It safeguards the circuit by limiting the output current during overloads.
  • Thermal Shutdown: Prevents damage from excessive heat by shutting down the regulator when the temperature exceeds the specified limit.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Compact size
  • Built-in protection features

Disadvantages

  • Limited maximum output current
  • Sensitive to external noise and interference

Working Principles

The BCR08PNH6433XTMA1 utilizes a feedback control mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. When the input voltage or load changes, the regulator responds accordingly to ensure a stable output.

Detailed Application Field Plans

The BCR08PNH6433XTMA1 is commonly used in: - Battery-powered devices - Portable consumer electronics - Automotive applications - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the BCR08PNH6433XTMA1 include: - LM317: A widely used adjustable voltage regulator with higher output current capability. - LT1086: Offers low dropout voltage and higher output current compared to the BCR08PNH6433XTMA1. - L78xx Series: Fixed voltage regulators available in various output voltage options.

In conclusion, the BCR08PNH6433XTMA1 is a reliable voltage regulator with precise regulation capabilities, making it suitable for a wide range of electronic applications.

[Word Count: 410]

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací BCR08PNH6433XTMA1 v technických řešeních

  1. What is BCR08PNH6433XTMA1?

    • BCR08PNH6433XTMA1 is a silicon NPN Darlington transistor designed for use in general-purpose amplifier and low-speed switching applications.

  2. What are the key features of BCR08PNH6433XTMA1?

    • The key features include high current capability, low saturation voltage, and built-in resistor for base drive.

  3. What are the typical applications of BCR08PNH6433XTMA1?

    • Typical applications include relay drivers, hammer drivers, lamp drivers, and display drivers.

  4. What is the maximum collector current of BCR08PNH6433XTMA1?

    • The maximum collector current is 0.7A.

  5. What is the maximum collector-emitter voltage of BCR08PNH6433XTMA1?

    • The maximum collector-emitter voltage is 50V.

  6. Does BCR08PNH6433XTMA1 require an external base resistor?

    • No, it has a built-in resistor for base drive.

  7. What is the thermal resistance of BCR08PNH6433XTMA1?

    • The thermal resistance is 125°C/W.

  8. Is BCR08PNH6433XTMA1 suitable for low-speed switching applications?

    • Yes, it is suitable for low-speed switching applications.

  9. What is the package type of BCR08PNH6433XTMA1?

    • It comes in a TO-92MOD package.

  10. Are there any recommended alternative transistors to BCR08PNH6433XTMA1?

    • Some recommended alternatives include BCR08AM-12L, BCR08AM-12LB, and BCR08AM-12LG.