LTC4162EUFD-L40#PBF

Product Overview

Use

This product is primarily used for charging lithium-ion batteries in various electronic devices, such as smartphones, tablets, portable media players, and other portable electronic devices.

Characteristics

High efficiency: The LTC4162EUFD-L40#PBF offers high charging efficiency, ensuring optimal use of power during the charging process.
Fast charging capability: This IC supports fast charging protocols, allowing for quick and efficient battery charging.
Wide input voltage range: It can accept a wide range of input voltages, making it suitable for different power sources.
Temperature monitoring: The LTC4162EUFD-L40#PBF includes temperature monitoring features to prevent overheating during the charging process.
Safety features: It incorporates various safety mechanisms to protect the battery from overcharging, overcurrent, and short-circuit conditions.

Package and Quantity

The LTC4162EUFD-L40#PBF is available in a small form factor 28-pin QFN package. It is typically sold in reels or tubes containing multiple units.

Specifications

Input Voltage Range: 4V to 35V
Charging Current: Up to 4A
Charging Voltage: Programmable up to 4.2V per cell
Operating Temperature Range: -40°C to 85°C
Control Interface: I2C-compatible

Pin Configuration

The LTC4162EUFD-L40#PBF has a total of 28 pins. The detailed pin configuration is as follows:

VIN: Input voltage pin
GND: Ground pin
VBAT: Battery voltage pin
TSNS: Temperature sense pin
I2C_SCL: I2C serial clock pin
I2C_SDA: I2C serial data pin
STAT: Status output pin
INTVCC: Internal voltage supply pin
VREF: Reference voltage pin
VOUT: Output voltage pin
PROG: Programming pin
ILIM: Current limit programming pin
BATFET: Battery FET control pin
TSCL: Thermistor sense pin
TSDA: Thermistor sense pin
NTC: Negative temperature coefficient pin
VSS: Ground pin
VSS: Ground pin
VSS: Ground pin
VSS: Ground pin
VSS: Ground pin
VSS: Ground pin
VSS: Ground pin
VSS: Ground pin
VSS: Ground pin
VSS: Ground pin
VSS: Ground pin
VSS: Ground pin

Functional Features

The LTC4162EUFD-L40#PBF offers the following functional features: - Constant current and constant voltage charging modes - Programmable charging parameters - Charge termination based on battery voltage and current thresholds - Temperature monitoring and thermal regulation - Fault detection and protection mechanisms

Advantages and Disadvantages

Advantages: - High charging efficiency leads to reduced power consumption. - Fast charging capability allows for quick battery replenishment. - Wide input voltage range provides flexibility in power source selection. - Safety features protect the battery from potential damage.

Disadvantages: - Limited to lithium-ion battery charging applications. - Requires additional external components for a complete charging solution.

Working Principles

The LTC4162EUFD-L40#PBF operates by regulating the charging current and voltage supplied to the lithium-ion battery. It monitors the battery's voltage, current, and temperature to ensure safe and efficient charging. The IC adjusts the charging parameters based on the battery's state of charge and the user-defined settings.

Detailed Application Field Plans

The LTC4162EUFD-L40#PBF is widely used in various portable electronic devices that rely on lithium-ion batteries for power. Some common application fields include: - Smartphones and tablets - Portable media players - Wearable devices - Handheld gaming consoles - GPS navigation systems

Detailed Alternative Models

For those seeking alternative options, the following models can be considered: - LTC4162EUFD-L36#PBF: Similar to LTC4162EUFD-L40#PBF but with a lower maximum charging voltage. - LTC4162EUFD-L44#PBF: Similar to LTC4162EUFD-L40#PBF but with a higher maximum charging voltage. - LTC4162EUFD-L28#PBF: Similar to LTC4162EUFD-L40#PBF but with a smaller pin count.

In conclusion, the LTC

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací LTC4162EUFD-L40#PBF v technických řešeních

Sure! Here are 10 common questions and answers related to the application of LTC4162EUFD-L40#PBF in technical solutions:

Q: What is LTC4162EUFD-L40#PBF? A: LTC4162EUFD-L40#PBF is a high-efficiency, multi-chemistry battery charger controller IC.
Q: What are the key features of LTC4162EUFD-L40#PBF? A: Some key features include wide input voltage range, programmable charging current, automatic power path management, and support for multiple battery chemistries.
Q: Which battery chemistries are supported by LTC4162EUFD-L40#PBF? A: LTC4162EUFD-L40#PBF supports lithium-ion (Li-Ion), lithium iron phosphate (LiFePO4), and lead-acid battery chemistries.
Q: Can LTC4162EUFD-L40#PBF charge multiple batteries simultaneously? A: Yes, LTC4162EUFD-L40#PBF supports multi-cell battery charging and can charge multiple batteries in parallel.
Q: What is the maximum charging current that LTC4162EUFD-L40#PBF can handle? A: LTC4162EUFD-L40#PBF can handle charging currents up to 3A.
Q: Does LTC4162EUFD-L40#PBF have any built-in safety features? A: Yes, LTC4162EUFD-L40#PBF includes various safety features like overvoltage protection, overcurrent protection, and thermal shutdown.
Q: Can LTC4162EUFD-L40#PBF be used in both standalone and embedded applications? A: Yes, LTC4162EUFD-L40#PBF is suitable for both standalone and embedded applications.
Q: What is the input voltage range supported by LTC4162EUFD-L40#PBF? A: LTC4162EUFD-L40#PBF can accept input voltages from 4.5V to 35V.
Q: Does LTC4162EUFD-L40#PBF have any communication interfaces? A: Yes, LTC4162EUFD-L40#PBF supports I2C communication interface for configuration and monitoring.
Q: Are there any evaluation boards or reference designs available for LTC4162EUFD-L40#PBF? A: Yes, Linear Technology (now part of Analog Devices) provides evaluation boards and reference designs for LTC4162EUFD-L40#PBF to aid in its application development.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of your technical solution.