Maxim Integrated
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
MAX6705AZKA+T
Zobrazit detail DataSheets

MAX6705AZKA+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Reference
  • Characteristics: High precision, low dropout voltage, low quiescent current
  • Package: SOT23-3
  • Essence: Provides a stable reference voltage for various electronic applications
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Output Voltage: 2.5V
  • Initial Accuracy: ±0.5%
  • Temperature Coefficient: ±50ppm/°C
  • Dropout Voltage: 200mV at 1mA
  • Quiescent Current: 45µA
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MAX6705AZKA+T has three pins in the SOT23-3 package:

  1. VOUT: Output Voltage
  2. GND: Ground
  3. VIN: Input Voltage

Functional Features

  • High Precision: The MAX6705AZKA+T provides a highly accurate output voltage of 2.5V with an initial accuracy of ±0.5%.
  • Low Dropout Voltage: With a dropout voltage of only 200mV at 1mA, this voltage reference minimizes power dissipation.
  • Low Quiescent Current: The device operates with a low quiescent current of 45µA, making it suitable for battery-powered applications.

Advantages and Disadvantages

Advantages: - High precision ensures accurate voltage references. - Low dropout voltage reduces power consumption. - Low quiescent current extends battery life.

Disadvantages: - Limited output voltage options. - Restricted operating temperature range.

Working Principles

The MAX6705AZKA+T is based on bandgap voltage reference technology. It utilizes a combination of bipolar and CMOS circuits to generate a stable reference voltage. The bandgap voltage reference compensates for temperature variations, ensuring consistent output voltage across a wide temperature range.

Detailed Application Field Plans

The MAX6705AZKA+T is commonly used in various electronic applications that require a stable reference voltage. Some typical application fields include:

  1. Analog-to-Digital Converters (ADCs)
  2. Digital-to-Analog Converters (DACs)
  3. Voltage regulators
  4. Battery-powered devices
  5. Sensor circuits

Detailed and Complete Alternative Models

  • MAX6706AZKA+T: 2.048V output voltage, otherwise similar specifications.
  • MAX6707AZKA+T: 3.0V output voltage, otherwise similar specifications.
  • MAX6708AZKA+T: 4.096V output voltage, otherwise similar specifications.

These alternative models provide different output voltage options while maintaining similar characteristics and package types.

Word count: 248 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací MAX6705AZKA+T v technických řešeních

Sure! Here are 10 common questions and answers related to the application of MAX6705AZKA+T in technical solutions:

  1. Question: What is the MAX6705AZKA+T?
    - Answer: The MAX6705AZKA+T is a voltage detector IC manufactured by Maxim Integrated. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of MAX6705AZKA+T?
    - Answer: The operating voltage range of MAX6705AZKA+T is typically between 1.6V and 6.5V.

  3. Question: How does MAX6705AZKA+T detect undervoltage conditions?
    - Answer: MAX6705AZKA+T detects undervoltage conditions by comparing the input voltage with a fixed reference voltage. When the input voltage falls below the reference voltage, it triggers an output signal.

  4. Question: Can MAX6705AZKA+T be used for overvoltage detection as well?
    - Answer: No, MAX6705AZKA+T is specifically designed for undervoltage detection only. For overvoltage detection, you would need a different voltage detector IC.

  5. Question: What is the output configuration of MAX6705AZKA+T?
    - Answer: MAX6705AZKA+T has an open-drain output configuration, which means it can sink current but cannot source current. An external pull-up resistor is required to pull the output signal high.

  6. Question: What is the typical quiescent current consumption of MAX6705AZKA+T?
    - Answer: The typical quiescent current consumption of MAX6705AZKA+T is very low, usually around 1.5µA.

  7. Question: Can MAX6705AZKA+T be used in battery-powered applications?
    - Answer: Yes, MAX6705AZKA+T is suitable for battery-powered applications due to its low quiescent current consumption, which helps conserve battery life.

  8. Question: What is the maximum operating temperature range of MAX6705AZKA+T?
    - Answer: The maximum operating temperature range of MAX6705AZKA+T is typically between -40°C and +85°C.

  9. Question: Does MAX6705AZKA+T have any built-in hysteresis?
    - Answer: Yes, MAX6705AZKA+T has a built-in hysteresis of approximately 50mV, which helps prevent output oscillation near the threshold voltage.

  10. Question: Can multiple MAX6705AZKA+T devices be connected in parallel for redundancy?
    - Answer: Yes, multiple MAX6705AZKA+T devices can be connected in parallel to monitor the same power supply. This provides redundancy and improves reliability in critical applications.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.