MAX6717AUKSVD2+T

Product Overview

Category: Integrated Circuit (IC)
Use: Voltage Monitor
Characteristics: Low-power, Precision, Adjustable Threshold
Package: SOT23-5
Essence: Monitors voltage levels and provides a digital output based on the threshold set by the user.
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

Supply Voltage Range: 1.6V to 5.5V
Threshold Voltage Options: Adjustable from 1.22V to 5.0V in 50mV steps
Operating Temperature Range: -40°C to +125°C
Quiescent Current: 3µA (typical)
Output Type: Active-Low Open-Drain
Accuracy: ±1.5% (typical)

Pin Configuration

The MAX6717AUKSVD2+T has a total of 5 pins:

GND: Ground connection
IN: Input voltage to be monitored
SET: Threshold voltage setting pin
OUT: Digital output indicating voltage status
VCC: Supply voltage input

Functional Features

Monitors the input voltage and compares it with the threshold voltage set by the user.
Provides an active-low open-drain output that indicates whether the input voltage is above or below the threshold.
Adjustable threshold voltage allows flexibility in monitoring different voltage levels.
Low quiescent current ensures minimal power consumption.

Advantages and Disadvantages

Advantages

Wide supply voltage range enables compatibility with various systems.
Adjustable threshold voltage provides versatility in voltage monitoring applications.
Low quiescent current minimizes power consumption.
Small package size (SOT23-5) allows for space-efficient designs.

Disadvantages

Accuracy may vary slightly depending on operating conditions.
Limited to monitoring voltage levels and does not provide additional functionality.

Working Principles

The MAX6717AUKSVD2+T operates by comparing the input voltage with the threshold voltage set by the user using the SET pin. If the input voltage is below the threshold, the OUT pin will be pulled low, indicating a low voltage condition. Conversely, if the input voltage exceeds the threshold, the OUT pin will be in a high-impedance state.

Detailed Application Field Plans

The MAX6717AUKSVD2+T can be used in various applications where voltage monitoring is critical. Some potential application fields include:

Battery-Powered Devices: Monitoring battery voltage to prevent over-discharge and ensure safe operation.
Power Supply Systems: Detecting undervoltage conditions to trigger appropriate actions or alarms.
Industrial Control Systems: Monitoring voltage levels in critical equipment to ensure proper functioning and prevent damage.
Automotive Electronics: Voltage monitoring in automotive systems to detect faults and protect sensitive components.

Detailed and Complete Alternative Models

MAX6716AUKSVD2+T
MAX6718AUKSVD2+T
MAX6719AUKSVD2+T
MAX6720AUKSVD2+T

These alternative models offer similar functionality but may have different specifications or package options to suit specific requirements.

Word count: 324 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací MAX6717AUKSVD2+T v technických řešeních

Sure! Here are 10 common questions and answers related to the application of MAX6717AUKSVD2+T in technical solutions:

Q: What is the MAX6717AUKSVD2+T? A: The MAX6717AUKSVD2+T is a voltage detector IC with an adjustable threshold voltage, commonly used for monitoring power supply voltages in various electronic applications.
Q: What is the operating voltage range of MAX6717AUKSVD2+T? A: The operating voltage range of MAX6717AUKSVD2+T is typically between 1.6V and 5.5V.
Q: How does the adjustable threshold voltage feature work? A: The adjustable threshold voltage feature allows users to set a specific voltage level at which the MAX6717AUKSVD2+T will trigger an output signal, indicating that the monitored voltage has fallen below the set threshold.
Q: Can I use MAX6717AUKSVD2+T to monitor multiple power supply voltages simultaneously? A: Yes, you can use multiple MAX6717AUKSVD2+T devices to monitor different power supply voltages independently.
Q: What is the typical quiescent current consumption of MAX6717AUKSVD2+T? A: The typical quiescent current consumption of MAX6717AUKSVD2+T is very low, usually around 1µA.
Q: Is the MAX6717AUKSVD2+T suitable for battery-powered applications? A: Yes, the low quiescent current and wide operating voltage range make it suitable for battery-powered applications where power efficiency is crucial.
Q: Does the MAX6717AUKSVD2+T have any built-in hysteresis? A: Yes, the MAX6717AUKSVD2+T has a built-in hysteresis feature that prevents false triggering due to voltage fluctuations near the threshold level.
Q: Can I use the MAX6717AUKSVD2+T in automotive applications? A: Yes, the MAX6717AUKSVD2+T is designed to meet automotive industry standards and can be used in automotive applications.
Q: What is the output configuration of MAX6717AUKSVD2+T? A: The MAX6717AUKSVD2+T has an open-drain output configuration, allowing it to interface with various logic levels.
Q: Are there any specific precautions to consider when using MAX6717AUKSVD2+T? A: It is important to ensure proper decoupling and filtering of the power supply inputs to minimize noise and voltage spikes that could affect the accuracy of the voltage detection. Additionally, refer to the datasheet for detailed application guidelines and recommended operating conditions.

Please note that the answers provided here are general and may vary depending on the specific requirements and application scenarios. Always refer to the datasheet and consult with the manufacturer for accurate and up-to-date information.