Microsemi Corporation
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
JANTXV1N2806RB
Zobrazit detail DataSheets

JANTXV1N2806RB

Product Overview

Category:

The JANTXV1N2806RB belongs to the category of semiconductor devices.

Use:

It is commonly used as a voltage regulator or surge protection component in electronic circuits.

Characteristics:

  • High voltage capability
  • Fast response time
  • Low leakage current

Package:

The JANTXV1N2806RB is typically available in a DO-5 package.

Essence:

This product serves as a crucial component in ensuring the stability and protection of electronic circuits.

Packaging/Quantity:

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Reverse Voltage: 200V
  • Average Rectified Forward Current: 20A
  • Peak Surge Current: 300A
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The JANTXV1N2806RB typically has two pins, with the anode and cathode connections clearly labeled.

Functional Features

  • Voltage regulation
  • Surge protection
  • Fast response to transient overvoltage conditions

Advantages

  • High voltage capability
  • Fast response time
  • Low leakage current
  • Reliable performance under varying operating conditions

Disadvantages

  • Relatively large physical size due to the DO-5 package
  • Higher cost compared to lower-rated voltage regulators

Working Principles

The JANTXV1N2806RB operates based on the principles of Zener breakdown and avalanche breakdown, providing stable voltage regulation and surge protection.

Detailed Application Field Plans

  • Power supply units
  • Industrial control systems
  • Automotive electronics
  • Telecommunications equipment

Detailed and Complete Alternative Models

  • JANTXV1N5806RB
  • JANTXV1N3806RB
  • JANTXV1N4806RB

This completes the English editing encyclopedia entry structure for the JANTXV1N2806RB.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací JANTXV1N2806RB v technických řešeních

  1. What is the JANTXV1N2806RB diode used for?

    • The JANTXV1N2806RB diode is commonly used for voltage regulation, surge protection, and rectification in various technical solutions.

  2. What are the key specifications of the JANTXV1N2806RB diode?

    • The JANTXV1N2806RB diode is a 600W transient voltage suppressor diode with a breakdown voltage of 6.8V and a low clamping voltage.

  3. How does the JANTXV1N2806RB diode provide surge protection?

    • The JANTXV1N2806RB diode protects against voltage spikes by diverting excess current away from sensitive components, thereby safeguarding them from damage.

  4. In what applications is the JANTXV1N2806RB diode commonly used?

    • The JANTXV1N2806RB diode is frequently employed in power supplies, automotive electronics, telecommunications equipment, and industrial control systems.

  5. What are the temperature and storage requirements for the JANTXV1N2806RB diode?

    • The JANTXV1N2806RB diode typically operates within a temperature range of -55°C to +175°C and should be stored in a dry environment at temperatures between -55°C and +175°C.

  6. Does the JANTXV1N2806RB diode require any special mounting considerations?

    • The JANTXV1N2806RB diode can be mounted using standard techniques such as through-hole or surface mount soldering, and it is important to ensure proper heat dissipation during installation.

  7. What are the potential failure modes of the JANTXV1N2806RB diode?

    • The JANTXV1N2806RB diode may fail due to excessive current, voltage surges, or prolonged exposure to high temperatures, so it's crucial to operate within its specified limits.

  8. Can the JANTXV1N2806RB diode be used in parallel for higher current handling?

    • Yes, the JANTXV1N2806RB diode can be connected in parallel to increase the overall current-handling capacity while ensuring that each diode shares the load evenly.

  9. Are there any recommended test procedures for verifying the performance of the JANTXV1N2806RB diode?

    • Standard tests such as forward voltage drop measurement, reverse leakage current measurement, and transient voltage suppression testing can be performed to verify the diode's performance.

  10. What are the industry standards or certifications associated with the JANTXV1N2806RB diode?

    • The JANTXV1N2806RB diode complies with MIL-PRF-19500/516 military specifications and is often used in aerospace, defense, and other mission-critical applications requiring high reliability components.