Viz Specifikace pro podrobnosti o produktu.
MC33982CHFKR2
Product Overview
Category
MC33982CHFKR2 belongs to the category of integrated circuits (ICs).
Use
It is commonly used in automotive applications for motor control and driver functions.
Characteristics
- High voltage capability
- Low quiescent current
- Overcurrent protection
- Thermal shutdown protection
- Short-circuit protection
Package
MC33982CHFKR2 is available in a compact surface mount package.
Essence
The essence of MC33982CHFKR2 lies in its ability to provide efficient and reliable motor control and driver functionality in automotive systems.
Packaging/Quantity
The product is typically packaged in reels or tubes, with varying quantities depending on the supplier.
Specifications
- Supply Voltage: 5.5V to 28V
- Output Current: Up to 1.5A per channel
- Operating Temperature Range: -40°C to +125°C
- Number of Channels: 2
- Logic Input Voltage: 3.3V to 5V
Detailed Pin Configuration
MC33982CHFKR2 has a total of 16 pins, which are assigned as follows:
- IN1 - Input 1
- OUT1 - Output 1
- GND - Ground
- VCC - Power supply
- IN2 - Input 2
- OUT2 - Output 2
- EN - Enable pin
- FAULT - Fault output
- DIAG1 - Diagnostic output 1
- DIAG2 - Diagnostic output 2
- VREF - Reference voltage
- NC - No connection
- NC - No connection
- NC - No connection
- NC - No connection
- NC - No connection
Functional Features
- Dual H-bridge configuration
- Independent control of each channel
- Fault detection and reporting
- Diagnostic outputs for monitoring motor status
Advantages and Disadvantages
Advantages
- High voltage capability allows for use in a wide range of automotive applications
- Low quiescent current helps to minimize power consumption
- Overcurrent, thermal shutdown, and short-circuit protection enhance system reliability
Disadvantages
- Limited number of channels (2) may not be suitable for applications requiring more motor control options
- Higher cost compared to simpler motor control solutions
Working Principles
MC33982CHFKR2 operates by receiving control signals through the input pins (IN1 and IN2) and generating corresponding output signals (OUT1 and OUT2) to drive the connected motor. The enable pin (EN) is used to activate or deactivate the motor driver. The fault pin (FAULT) provides an indication if any faults are detected, while the diagnostic outputs (DIAG1 and DIAG2) provide additional information about the motor's status.
Detailed Application Field Plans
MC33982CHFKR2 finds extensive application in various automotive systems, including:
- Electric power steering systems
- HVAC blowers and fans
- Window lift and sunroof control
- Seat adjustment mechanisms
- Mirror positioning systems
- Headlight leveling systems
- Fuel pump control
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to MC33982CHFKR2 include:
- L298N - Dual H-Bridge Motor Driver IC
- DRV8833 - Dual H-Bridge Motor Driver IC
- TB6612FNG - Dual H-Bridge Motor Driver IC
- SN754410 - Quadruple Half-H Driver IC
These alternatives can be considered based on specific requirements and compatibility with the target application.
Word count: 530 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací MC33982CHFKR2 v technických řešeních
Sure! Here are 10 common questions and answers related to the application of MC33982CHFKR2 in technical solutions:
Q: What is MC33982CHFKR2? A: MC33982CHFKR2 is a dual H-bridge motor driver integrated circuit (IC) commonly used in technical solutions for controlling motors.
Q: What is the maximum voltage rating of MC33982CHFKR2? A: The maximum voltage rating of MC33982CHFKR2 is typically around 5.5V.
Q: Can MC33982CHFKR2 drive both DC and stepper motors? A: Yes, MC33982CHFKR2 can be used to drive both DC motors and stepper motors.
Q: What is the maximum current that MC33982CHFKR2 can handle? A: MC33982CHFKR2 can handle a maximum continuous output current of around 1.5A per channel.
Q: Is MC33982CHFKR2 suitable for battery-powered applications? A: Yes, MC33982CHFKR2 is designed to work well in battery-powered applications due to its low quiescent current consumption.
Q: Does MC33982CHFKR2 have built-in protection features? A: Yes, MC33982CHFKR2 includes various protection features like overcurrent protection, thermal shutdown, and under-voltage lockout.
Q: Can I control MC33982CHFKR2 using a microcontroller? A: Yes, MC33982CHFKR2 can be easily controlled using a microcontroller by providing appropriate logic-level signals to its input pins.
Q: How many motors can be controlled using a single MC33982CHFKR2 IC? A: MC33982CHFKR2 can control two motors simultaneously, as it is a dual H-bridge motor driver.
Q: What is the operating temperature range of MC33982CHFKR2? A: The operating temperature range of MC33982CHFKR2 is typically between -40°C to +125°C.
Q: Are there any application examples where MC33982CHFKR2 is commonly used? A: Yes, MC33982CHFKR2 is often used in applications like robotics, automotive systems, industrial automation, and consumer electronics for motor control purposes.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for MC33982CHFKR2.