ON Semiconductor
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
NCP1395BDR2G
Zobrazit detail DataSheets

NCP1395BDR2G

Product Overview

Category

NCP1395BDR2G belongs to the category of integrated circuits (ICs) specifically designed for power management applications.

Use

This product is primarily used in power supply systems, where it provides control and regulation functions to ensure efficient and reliable power delivery.

Characteristics

  • High efficiency: The NCP1395BDR2G offers high conversion efficiency, minimizing power losses during operation.
  • Wide input voltage range: It can handle a wide range of input voltages, making it suitable for various power supply applications.
  • Protection features: The IC incorporates several protection mechanisms, including overvoltage and overcurrent protection, ensuring safe operation.
  • Low standby power consumption: The NCP1395BDR2G consumes minimal power in standby mode, contributing to energy savings.

Package

The NCP1395BDR2G is available in a small outline package (SOIC), which facilitates easy integration into circuit boards.

Essence

The essence of the NCP1395BDR2G lies in its ability to efficiently regulate and control power supply systems, ensuring stable and reliable power delivery.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Input voltage range: 8V - 20V
  • Output voltage range: 3V - 12V
  • Maximum output current: 2A
  • Operating temperature range: -40°C to 85°C
  • Switching frequency: 100kHz - 500kHz

Detailed Pin Configuration

The NCP1395BDR2G has a total of 8 pins, each serving a specific function:

  1. VCC: Power supply input pin.
  2. GND: Ground reference pin.
  3. FB: Feedback pin for voltage regulation.
  4. COMP: Compensation pin for stability control.
  5. CS: Current sense pin for current regulation.
  6. SS: Soft-start pin for gradual power-up.
  7. EN: Enable pin for turning the IC on/off.
  8. OUT: Output pin for regulated power supply.

Functional Features

  • Voltage regulation: The NCP1395BDR2G ensures precise voltage regulation, maintaining a stable output voltage even under varying load conditions.
  • Current regulation: It also provides accurate current regulation, preventing excessive current flow and protecting the system components.
  • Soft-start function: The soft-start feature allows for a gradual increase in output voltage during power-up, reducing stress on the system.
  • Overvoltage/overcurrent protection: The IC incorporates protection mechanisms to safeguard against voltage spikes and excessive current, enhancing system reliability.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power losses.
  • Wide input voltage range enables versatile applications.
  • Protection features enhance system safety.
  • Low standby power consumption contributes to energy savings.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Requires external components for complete power supply implementation.

Working Principles

The NCP1395BDR2G operates based on a pulse width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the switching signal, which controls the power delivered to the load. By monitoring feedback signals and comparing them with a reference voltage, the IC continuously adjusts the duty cycle to maintain the desired output voltage.

Detailed Application Field Plans

The NCP1395BDR2G finds application in various power supply systems, including but not limited to: - AC-DC converters for consumer electronics. - DC-DC converters for automotive applications. - Power supplies for industrial equipment. - LED lighting systems.

Detailed and Complete Alternative Models

  1. NCP1396BDR2G: Similar to NCP1395BDR2G, but with higher maximum output current (3A).
  2. NCP1397BDR2G: Similar to NCP1395BDR2G, but with additional protection features such as overtemperature protection.
  3. NCP1398BDR2G: Similar to NCP1395BDR2G, but optimized for high-frequency applications.

These alternative models offer similar functionality to the NCP1395BDR2G while addressing specific requirements or providing additional features.

Word count: 678 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací NCP1395BDR2G v technických řešeních

Sure! Here are 10 common questions and answers related to the application of NCP1395BDR2G in technical solutions:

  1. Q: What is NCP1395BDR2G? A: NCP1395BDR2G is a high-performance, integrated circuit designed for power factor correction (PFC) applications.

  2. Q: What is the input voltage range of NCP1395BDR2G? A: The input voltage range of NCP1395BDR2G is typically between 85VAC and 265VAC.

  3. Q: What is the output power range supported by NCP1395BDR2G? A: NCP1395BDR2G supports an output power range of up to 300W.

  4. Q: Can NCP1395BDR2G be used in both single-phase and three-phase systems? A: Yes, NCP1395BDR2G can be used in both single-phase and three-phase systems.

  5. Q: Does NCP1395BDR2G have built-in protection features? A: Yes, NCP1395BDR2G includes various protection features such as overvoltage protection, overcurrent protection, and thermal shutdown.

  6. Q: What is the switching frequency of NCP1395BDR2G? A: The switching frequency of NCP1395BDR2G is typically around 100kHz.

  7. Q: Can NCP1395BDR2G operate in continuous conduction mode (CCM)? A: Yes, NCP1395BDR2G can operate in both continuous conduction mode (CCM) and discontinuous conduction mode (DCM).

  8. Q: Is NCP1395BDR2G compatible with digital control interfaces? A: No, NCP1395BDR2G is an analog controller and does not have a built-in digital control interface.

  9. Q: What are the typical applications of NCP1395BDR2G? A: NCP1395BDR2G is commonly used in power supplies for LED lighting, consumer electronics, and industrial equipment.

  10. Q: Are there any evaluation boards or reference designs available for NCP1395BDR2G? A: Yes, ON Semiconductor provides evaluation boards and reference designs to help users get started with NCP1395BDR2G-based solutions.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and application notes for detailed information.