STMicroelectronics
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
TDA7376B
Zobrazit detail DataSheets

TDA7376B

Product Overview

Category

TDA7376B belongs to the category of integrated circuits (ICs) specifically designed for audio amplification.

Use

The TDA7376B is primarily used in audio systems to amplify low-power audio signals, providing high-quality sound output.

Characteristics

  • High power capability: The TDA7376B can deliver up to 35 watts of power per channel.
  • Low distortion: It ensures minimal distortion in the amplified audio signal.
  • Wide frequency response: The IC covers a broad range of frequencies, allowing for accurate reproduction of audio signals.
  • Thermal protection: The TDA7376B incorporates thermal protection mechanisms to prevent overheating and damage.

Package

The TDA7376B is available in a compact and industry-standard package, making it easy to integrate into various audio systems.

Essence

The essence of TDA7376B lies in its ability to efficiently amplify audio signals while maintaining high fidelity and minimizing distortion.

Packaging/Quantity

The TDA7376B is typically packaged in tubes or reels, with quantities varying based on customer requirements.

Specifications

  • Power supply voltage: 8V - 18V
  • Output power: Up to 35W per channel
  • Total harmonic distortion: <0.5%
  • Frequency response: 20Hz - 20kHz
  • Operating temperature range: -40°C to +125°C

Detailed Pin Configuration

The TDA7376B features a 15-pin configuration:

  1. MUTE
  2. IN1-
  3. IN1+
  4. GND
  5. VCC
  6. OUT1
  7. OUT2
  8. OUT3
  9. OUT4
  10. VS
  11. BYPASS
  12. ST-BY
  13. DIAG
  14. DIAG
  15. DIAG

Functional Features

  • Mute function: Allows the user to mute the audio output.
  • Bypass mode: Enables direct signal routing without amplification.
  • Standby mode: Puts the IC in a low-power consumption state when not in use.
  • Diagnostic outputs: Provide information about the amplifier's status and fault conditions.

Advantages and Disadvantages

Advantages

  • High power capability for its size.
  • Low distortion ensures accurate sound reproduction.
  • Wide frequency response covers the entire audible spectrum.
  • Thermal protection prevents damage due to overheating.

Disadvantages

  • Requires an external power supply.
  • Limited output power compared to higher-end amplifiers.

Working Principles

The TDA7376B operates as a class AB audio amplifier. It takes the low-power audio input signals and amplifies them using internal circuitry. The amplified signals are then sent to the output pins, ready for connection to speakers or other audio devices.

Detailed Application Field Plans

The TDA7376B finds applications in various audio systems, including: 1. Car audio systems 2. Home theater systems 3. Portable speakers 4. Professional audio equipment

Detailed and Complete Alternative Models

  • TDA7375
  • TDA7377
  • TDA7384
  • TDA7386
  • TDA7396

These alternative models offer similar functionality and can be used as replacements for the TDA7376B in different audio amplification applications.

In conclusion, the TDA7376B is a versatile audio amplifier IC that provides high-quality sound amplification with low distortion. Its compact package, wide frequency response, and thermal protection make it suitable for various audio applications. However, it is important to consider the specific requirements of each application and explore alternative models if necessary.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací TDA7376B v technických řešeních

Sure! Here are 10 common questions and answers related to the application of TDA7376B in technical solutions:

  1. Q: What is TDA7376B? A: TDA7376B is a class AB quad bridge audio amplifier integrated circuit (IC) that can be used in various audio applications.

  2. Q: What is the maximum power output of TDA7376B? A: The maximum power output of TDA7376B is typically 35 watts per channel when operating at a 14.4V supply voltage.

  3. Q: Can TDA7376B be used in car audio systems? A: Yes, TDA7376B is commonly used in car audio systems due to its compact size and ability to deliver high-quality audio output.

  4. Q: Does TDA7376B require an external heat sink? A: Yes, TDA7376B requires an external heat sink to dissipate heat generated during operation and ensure proper thermal management.

  5. Q: What is the recommended power supply voltage for TDA7376B? A: The recommended power supply voltage for TDA7376B is between 8V and 18V DC.

  6. Q: Can TDA7376B drive low-impedance speakers? A: Yes, TDA7376B is designed to drive speakers with impedance as low as 2 ohms, making it suitable for various speaker configurations.

  7. Q: Is TDA7376B protected against short circuits and thermal overload? A: Yes, TDA7376B features built-in protection mechanisms against short circuits, thermal overload, and overvoltage conditions.

  8. Q: Can TDA7376B be used in stereo or bridged mode? A: Yes, TDA7376B can be used in both stereo mode (2 channels) and bridged mode (1 channel), providing flexibility in system design.

  9. Q: Does TDA7376B require external components for operation? A: Yes, TDA7376B requires a few external components such as resistors, capacitors, and inductors to form a complete audio amplifier circuit.

  10. Q: Are there any application notes or reference designs available for TDA7376B? A: Yes, the manufacturer of TDA7376B provides application notes and reference designs that can help users in implementing the IC in their projects.

Please note that these answers are general and may vary depending on specific implementation requirements and circuit design considerations.