VN05N-E

Product Overview

Category: Electronic Component
Use: Power MOSFET
Characteristics: High voltage, low on-resistance, small package size
Package: TO-92
Essence: N-channel enhancement mode power MOSFET
Packaging/Quantity: Bulk packaging, 100 pieces per pack

Specifications

Voltage Rating: 60V
Current Rating: 0.1A
On-Resistance: 10Ω
Gate Threshold Voltage: 2V
Power Dissipation: 0.5W
Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The VN05N-E has three pins arranged in the following configuration:

Gate (G): Controls the flow of current through the MOSFET.
Drain (D): Connects to the load and carries the current when the MOSFET is turned on.
Source (S): Connected to the ground or reference potential.

Functional Features

Low on-resistance allows for efficient power transfer.
Fast switching speed enables high-frequency applications.
Small package size makes it suitable for space-constrained designs.
Enhanced thermal characteristics ensure reliable operation.

Advantages and Disadvantages

Advantages: - High voltage rating allows for use in various applications. - Low on-resistance minimizes power losses. - Small package size saves board space.

Disadvantages: - Limited current rating restricts usage in high-power applications. - Gate threshold voltage may require additional circuitry for proper control.

Working Principles

The VN05N-E is an N-channel enhancement mode power MOSFET. When a positive voltage is applied to the gate pin relative to the source pin, it creates an electric field that allows current to flow between the drain and source pins. This enables the MOSFET to act as a switch or amplifier in electronic circuits.

Detailed Application Field Plans

The VN05N-E is commonly used in low-power applications such as:

Switching power supplies
Battery chargers
LED lighting systems
Motor control circuits
Audio amplifiers

Detailed and Complete Alternative Models

VN10KMA: Similar specifications, higher voltage rating (100V)
VN06N: Similar specifications, lower on-resistance (8Ω)
VN03N: Similar specifications, lower voltage rating (30V)
VN07N: Similar specifications, higher current rating (0.2A)

Note: The above alternative models are provided for reference and may require additional evaluation based on specific application requirements.

This entry provides an overview of the VN05N-E power MOSFET, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací VN05N-E v technických řešeních

Sure! Here are 10 common questions and answers related to the application of VN05N-E in technical solutions:

Q: What is VN05N-E? A: VN05N-E is a type of power MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) used for switching applications.
Q: What is the maximum voltage rating of VN05N-E? A: The maximum voltage rating of VN05N-E is typically around 60 volts.
Q: What is the maximum current rating of VN05N-E? A: The maximum current rating of VN05N-E is usually around 0.5 amps.
Q: What are some typical applications of VN05N-E? A: VN05N-E is commonly used in various technical solutions such as motor control, relay drivers, solenoid drivers, and general-purpose switching circuits.
Q: Can VN05N-E be used for high-power applications? A: No, VN05N-E is not suitable for high-power applications due to its relatively low current rating.
Q: Is VN05N-E a logic-level MOSFET? A: Yes, VN05N-E is a logic-level MOSFET, meaning it can be driven directly by digital logic signals.
Q: What is the on-resistance of VN05N-E? A: The on-resistance of VN05N-E is typically around a few ohms.
Q: Does VN05N-E require a heatsink for normal operation? A: In most cases, VN05N-E does not require a heatsink for normal operation as long as it operates within its specified limits.
Q: Can VN05N-E handle reverse polarity protection? A: No, VN05N-E is not designed for reverse polarity protection. Additional circuitry or components may be required for that purpose.
Q: Are there any specific precautions to consider when using VN05N-E? A: It is important to ensure that the voltage and current ratings of VN05N-E are not exceeded. Additionally, proper ESD (Electrostatic Discharge) handling techniques should be followed during installation and handling of the device.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of VN05N-E.