Texas Instruments
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
TPS259570DSGT
Zobrazit detail DataSheets

TPS259570DSGT

Product Overview

Category

The TPS259570DSGT belongs to the category of electronic components, specifically power management integrated circuits (PMICs).

Use

This product is primarily used for overvoltage and overcurrent protection in various electronic devices and systems.

Characteristics

  • Overvoltage and overcurrent protection
  • Low power consumption
  • Fast response time
  • Compact package size
  • Wide operating voltage range

Package

The TPS259570DSGT is available in a small surface-mount package, which ensures easy integration into circuit boards.

Essence

The essence of the TPS259570DSGT lies in its ability to safeguard electronic devices from potential damage caused by excessive voltage or current.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Operating Voltage Range: 2.7V to 18V
  • Overvoltage Threshold: Adjustable from 2.8V to 16V
  • Overcurrent Threshold: Adjustable from 100mA to 5A
  • Quiescent Current: 10µA (typical)
  • Response Time: <1µs
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TPS259570DSGT has the following pin configuration:

  1. EN (Enable): Controls the device's operation.
  2. IN (Input): Connects to the power supply input.
  3. OUT (Output): Connects to the load or downstream circuitry.
  4. GND (Ground): Provides the reference ground for the device.

Functional Features

  • Overvoltage Protection: Monitors the input voltage and disconnects the output when it exceeds the set threshold.
  • Overcurrent Protection: Monitors the output current and disconnects the load when it exceeds the set threshold.
  • Fast Response Time: Reacts quickly to overvoltage and overcurrent events, minimizing potential damage to the load.
  • Enable Control: Allows for easy on/off control of the device.

Advantages and Disadvantages

Advantages

  • Provides reliable protection against overvoltage and overcurrent conditions.
  • Low power consumption ensures minimal impact on overall system efficiency.
  • Compact package size enables space-saving integration into various applications.
  • Wide operating voltage range makes it compatible with a wide range of electronic devices.

Disadvantages

  • Limited adjustability of overvoltage and overcurrent thresholds may not suit all application requirements.
  • Lack of built-in fault indication or reporting mechanism may make troubleshooting more challenging.

Working Principles

The TPS259570DSGT operates based on a combination of voltage and current monitoring. It continuously monitors the input voltage and output current levels. When the input voltage exceeds the set overvoltage threshold or the output current exceeds the set overcurrent threshold, the device disconnects the load from the power supply, providing protection against potential damage.

Detailed Application Field Plans

The TPS259570DSGT finds applications in various electronic systems, including but not limited to: 1. Power supplies 2. Battery charging circuits 3. Industrial automation equipment 4. Automotive electronics 5. Consumer electronics

Detailed and Complete Alternative Models

  1. TPS259560DSGT: Similar to TPS259570DSGT but with a lower overcurrent threshold range (adjustable from 50mA to 3A).
  2. TPS259580DSGT: Similar to TPS259570DSGT but with a higher overcurrent threshold range (adjustable from 200mA to 8A).
  3. TPS259590DSGT: Similar to TPS259570DSGT but with additional fault indication features.

These alternative models provide flexibility in selecting the appropriate overvoltage and overcurrent protection thresholds for specific application requirements.

Word count: 537 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací TPS259570DSGT v technických řešeních

Sure! Here are 10 common questions and answers related to the application of TPS259570DSGT in technical solutions:

  1. Q: What is TPS259570DSGT? A: TPS259570DSGT is a power distribution switch with an integrated current-limiting feature, designed for use in various technical solutions.

  2. Q: What is the maximum voltage rating of TPS259570DSGT? A: The maximum voltage rating of TPS259570DSGT is typically 5.5V.

  3. Q: What is the purpose of using TPS259570DSGT in technical solutions? A: TPS259570DSGT is used to protect sensitive electronic components from overcurrent and overvoltage conditions.

  4. Q: Can TPS259570DSGT handle high currents? A: Yes, TPS259570DSGT can handle high currents up to a certain limit, typically around 5A.

  5. Q: How does TPS259570DSGT provide overcurrent protection? A: TPS259570DSGT has built-in current-limiting functionality that automatically shuts off the power path when the current exceeds a set threshold.

  6. Q: Is TPS259570DSGT suitable for battery-powered applications? A: Yes, TPS259570DSGT is suitable for battery-powered applications as it has low quiescent current and supports low-power operation.

  7. Q: Can TPS259570DSGT be controlled remotely? A: No, TPS259570DSGT does not have remote control capabilities. It is a standalone power distribution switch.

  8. Q: Does TPS259570DSGT have thermal protection? A: Yes, TPS259570DSGT incorporates thermal shutdown protection to prevent damage due to excessive heat.

  9. Q: What is the typical operating temperature range for TPS259570DSGT? A: The typical operating temperature range for TPS259570DSGT is -40°C to 85°C.

  10. Q: Are there any application-specific considerations when using TPS259570DSGT? A: Yes, it is important to consider factors such as load requirements, input voltage levels, and thermal dissipation when designing with TPS259570DSGT.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements of TPS259570DSGT.