Viz Specifikace pro podrobnosti o produktu.
XC6118C37DGR-G
Product Overview
Category
XC6118C37DGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.
Characteristics
- Voltage regulation: XC6118C37DGR-G provides a stable output voltage.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
- Low quiescent current: The regulator consumes minimal power when no load is connected.
- Thermal shutdown protection: It automatically shuts down to prevent damage from excessive heat.
- Short-circuit protection: It safeguards against short circuits, preventing damage to the circuitry.
Package
XC6118C37DGR-G is available in a small surface-mount package.
Essence
The essence of XC6118C37DGR-G lies in its ability to provide reliable and stable voltage regulation for electronic circuits.
Packaging/Quantity
It is typically packaged in reels or tubes, with a quantity of several hundred units per package.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 3.7V
- Maximum output current: 100mA
- Dropout voltage: 200mV (typical)
- Quiescent current: 1μA (typical)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
XC6118C37DGR-G has three pins:
- VIN: Input voltage pin
- VOUT: Output voltage pin
- GND: Ground pin
Functional Features
- Voltage regulation: XC6118C37DGR-G maintains a constant output voltage regardless of changes in the input voltage or load conditions.
- Low dropout voltage: It can operate with a minimal voltage difference between the input and output, ensuring efficient power utilization.
- Low quiescent current: The regulator consumes very little current when there is no load connected, reducing power consumption.
- Thermal shutdown protection: It automatically shuts down if the temperature exceeds a certain threshold, preventing damage due to overheating.
- Short-circuit protection: XC6118C37DGR-G safeguards against short circuits, protecting the circuitry from damage.
Advantages and Disadvantages
Advantages
- Stable output voltage regulation
- Low dropout voltage for efficient operation
- Low quiescent current for reduced power consumption
- Thermal shutdown protection for safety
- Short-circuit protection for circuitry integrity
Disadvantages
- Limited maximum output current (100mA)
- Restricted input voltage range (2.5V - 6.0V)
Working Principles
XC6118C37DGR-G utilizes internal circuitry to compare the output voltage with a reference voltage. It adjusts the pass transistor's resistance to maintain a constant output voltage. This feedback mechanism ensures stable voltage regulation.
Detailed Application Field Plans
XC6118C37DGR-G finds applications in various electronic devices and systems, including: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to XC6118C37DGR-G are: - LM1117-3.3 - MCP1703-3302E/DB - AP2112K-3.3TRG1 - TS2937CP-3.3
These alternatives can be considered based on specific requirements and availability.
Word count: 411 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací XC6118C37DGR-G v technických řešeních
Sure! Here are 10 common questions and answers related to the application of XC6118C37DGR-G in technical solutions:
Q: What is XC6118C37DGR-G? A: XC6118C37DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a specified threshold.
Q: What is the operating voltage range of XC6118C37DGR-G? A: The operating voltage range of XC6118C37DGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C37DGR-G help in technical solutions? A: XC6118C37DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a certain level, ensuring proper system initialization.
Q: Can XC6118C37DGR-G be used in battery-powered applications? A: Yes, XC6118C37DGR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
Q: What is the typical reset threshold voltage of XC6118C37DGR-G? A: The typical reset threshold voltage of XC6118C37DGR-G is 3.7V.
Q: Does XC6118C37DGR-G have an adjustable reset threshold voltage? A: No, XC6118C37DGR-G does not have an adjustable reset threshold voltage. It is fixed at 3.7V.
Q: Is XC6118C37DGR-G available in different package options? A: Yes, XC6118C37DGR-G is available in various package options, including SOT-25 and USP-4B.
Q: Can XC6118C37DGR-G be used in automotive applications? A: Yes, XC6118C37DGR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: What is the output type of XC6118C37DGR-G? A: XC6118C37DGR-G has an open-drain output type, which requires an external pull-up resistor.
Q: Is XC6118C37DGR-G RoHS compliant? A: Yes, XC6118C37DGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118C37DGR-G.