XC6118C38BGR-G

Product Overview

Use

It is primarily used for voltage regulation in electronic circuits.

Characteristics

Input Voltage Range: 2.5V to 6.0V
Output Voltage: 3.8V
Maximum Output Current: 150mA
Low Dropout Voltage: 200mV (at 100mA)
Low Quiescent Current: 30μA (typical)
Thermal Shutdown Protection
Short Circuit Current Limit Protection
Small Package Size: SOT-23-5

Packaging/Quantity

XC6118C38BGR-G is available in a SOT-23-5 package. It is typically sold in reels containing a quantity of 3000 units per reel.

Specifications

Input Voltage Range: 2.5V to 6.0V
Output Voltage: 3.8V ±2%
Output Current: Up to 150mA
Dropout Voltage: 200mV (at 100mA)
Quiescent Current: 30μA (typical)
Operating Temperature Range: -40°C to +85°C
Package Type: SOT-23-5

Detailed Pin Configuration

XC6118C38BGR-G has the following pin configuration:

VIN (Input Voltage)
GND (Ground)
NC (No Connection)
VOUT (Output Voltage)
EN (Enable)

Functional Features

Voltage Regulation: The XC6118C38BGR-G provides a stable output voltage of 3.8V, regardless of input voltage fluctuations.
Low Dropout Voltage: The regulator maintains a low dropout voltage of 200mV, ensuring efficient power conversion.
Low Quiescent Current: With a typical quiescent current of 30μA, the XC6118C38BGR-G minimizes power consumption in standby mode.
Thermal Shutdown Protection: The device incorporates thermal shutdown protection to prevent damage due to excessive heat.
Short Circuit Current Limit Protection: It also features short circuit current limit protection, safeguarding the regulator and connected components.

Advantages and Disadvantages

Advantages

Wide input voltage range allows for flexibility in various applications.
Low dropout voltage ensures efficient power conversion.
Small package size enables space-saving designs.
Thermal shutdown and short circuit protection enhance reliability.

Disadvantages

Limited output current capacity (up to 150mA).
No adjustable output voltage option.

Working Principles

The XC6118C38BGR-G is a linear voltage regulator that utilizes a pass transistor to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage of 3.8V.

Detailed Application Field Plans

XC6118C38BGR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems - Communication modules

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118C38BGR-G are: - XC6206P382MR-G - LM1117IMPX-3.8/NOPB - MCP1700T-3802E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 366 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací XC6118C38BGR-G v technických řešeních

Sure! Here are 10 common questions and answers related to the application of XC6118C38BGR-G in technical solutions:

Q: What is XC6118C38BGR-G? A: XC6118C38BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a specified threshold.
Q: What is the operating voltage range of XC6118C38BGR-G? A: The operating voltage range of XC6118C38BGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C38BGR-G help in technical solutions? A: XC6118C38BGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a certain level, ensuring proper system initialization.
Q: What is the typical reset threshold voltage of XC6118C38BGR-G? A: The typical reset threshold voltage of XC6118C38BGR-G is 3.8V.
Q: Can XC6118C38BGR-G be used in battery-powered applications? A: Yes, XC6118C38BGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.
Q: Does XC6118C38BGR-G have any built-in delay for the reset signal? A: Yes, XC6118C38BGR-G has a built-in delay of approximately 200ms to ensure stable power supply before releasing the reset signal.
Q: Is XC6118C38BGR-G suitable for automotive applications? A: Yes, XC6118C38BGR-G is suitable for automotive applications as it meets the necessary quality and reliability standards.
Q: Can XC6118C38BGR-G be used in industrial control systems? A: Yes, XC6118C38BGR-G can be used in industrial control systems to ensure proper system initialization and prevent data corruption during power supply fluctuations.
Q: Does XC6118C38BGR-G have any additional features or protection mechanisms? A: Yes, XC6118C38BGR-G has built-in overvoltage protection, reverse voltage protection, and a watchdog timer function.
Q: What package does XC6118C38BGR-G come in? A: XC6118C38BGR-G comes in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of XC6118C38BGR-G.