Viz Specifikace pro podrobnosti o produktu.
XC6118C38DGR-G
Product Overview
Category
XC6118C38DGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.
Characteristics
- Voltage regulation: XC6118C38DGR-G provides a stable output voltage.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
- Low quiescent current: The regulator consumes minimal current when no load is connected.
- Thermal shutdown protection: It automatically shuts down to prevent damage from excessive heat.
Package
XC6118C38DGR-G is available in a small surface-mount package.
Essence
The essence of XC6118C38DGR-G lies in its ability to provide reliable and stable voltage regulation for electronic devices.
Packaging/Quantity
It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 3.8V
- Maximum output current: 150mA
- Dropout voltage: 200mV (at 100mA)
- Quiescent current: 30µA
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
XC6118C38DGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: XC6118C38DGR-G maintains a constant output voltage regardless of changes in the input voltage.
- Low dropout voltage: It can operate efficiently even when the input voltage is only slightly higher than the desired output voltage.
- Thermal shutdown protection: The regulator automatically shuts down if the temperature exceeds a certain threshold, preventing damage to the device.
- Low quiescent current: It consumes minimal current when no load is connected, conserving power.
Advantages and Disadvantages
Advantages
- Stable output voltage
- Low dropout voltage
- Thermal shutdown protection
- Low quiescent current
Disadvantages
- Limited maximum output current (150mA)
- Narrow input voltage range (2.5V - 6.0V)
Working Principles
XC6118C38DGR-G utilizes internal circuitry to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a constant output voltage.
Detailed Application Field Plans
XC6118C38DGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118C38DGR-G are: - LM1117-3.8 - MCP1700-3.8 - LP2985-3.8 - AP2112-3.8
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
Word count: 400 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací XC6118C38DGR-G v technických řešeních
Sure! Here are 10 common questions and answers related to the application of XC6118C38DGR-G in technical solutions:
Q: What is XC6118C38DGR-G? A: XC6118C38DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C38DGR-G? A: The operating voltage range of XC6118C38DGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C38DGR-G help in technical solutions? A: XC6118C38DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level, ensuring proper system initialization.
Q: What is the typical reset voltage threshold of XC6118C38DGR-G? A: The typical reset voltage threshold of XC6118C38DGR-G is 3.8V.
Q: Can XC6118C38DGR-G be used in battery-powered applications? A: Yes, XC6118C38DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.
Q: Does XC6118C38DGR-G have any built-in delay time for the reset signal? A: Yes, XC6118C38DGR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: Can XC6118C38DGR-G be used in automotive applications? A: Yes, XC6118C38DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: What is the package type of XC6118C38DGR-G? A: XC6118C38DGR-G is available in a small SOT-25 package, which is compact and easy to integrate into various designs.
Q: Is XC6118C38DGR-G compatible with both CMOS and TTL logic levels? A: Yes, XC6118C38DGR-G is compatible with both CMOS and TTL logic levels, making it versatile for different digital systems.
Q: Can XC6118C38DGR-G be used in industrial control systems? A: Yes, XC6118C38DGR-G can be used in industrial control systems as it operates reliably in a wide temperature range (-40°C to +85°C) and has excellent voltage detection accuracy.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.