XC6124E628MR-G

Product Overview

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

Input Voltage Range: 2.5V to 6.0V
Output Voltage Range: 1.2V to 5.5V
Maximum Output Current: 150mA
Low Dropout Voltage: 200mV (at 100mA)
Low Quiescent Current: 30μA (typical)
Package Type: SOT-25
Operating Temperature Range: -40°C to +85°C

Package and Quantity

XC6124E628MR-G is available in a SOT-25 package. It is typically sold in reels containing a specific quantity, usually specified by the manufacturer.

Specifications

Input Voltage Range: 2.5V to 6.0V
Output Voltage Range: 1.2V to 5.5V
Output Current: Up to 150mA
Dropout Voltage: 200mV (at 100mA)
Quiescent Current: 30μA (typical)
Line Regulation: ±0.3% (typical)
Load Regulation: ±0.5% (typical)
Ripple Rejection Ratio: 70dB (typical)
Operating Temperature Range: -40°C to +85°C

Pin Configuration

The XC6124E628MR-G has the following pin configuration:

```

| | --|----|-- |____| ```

Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: VOUT (Output Voltage)

Functional Features

Voltage regulation and stabilization
Low dropout voltage for efficient operation
Low quiescent current for power-saving applications
Wide input and output voltage range for versatility
Good line and load regulation for stable performance
High ripple rejection ratio for noise reduction

Advantages and Disadvantages

Advantages

Wide input and output voltage range
Low dropout voltage
Low quiescent current
Good line and load regulation
High ripple rejection ratio

Disadvantages

Maximum output current limited to 150mA

Working Principles

The XC6124E628MR-G is a voltage regulator that uses internal circuitry to maintain a stable output voltage, regardless of variations in the input voltage or load conditions. It achieves this by comparing the output voltage to a reference voltage and adjusting the internal circuitry accordingly.

Detailed Application Field Plans

The XC6124E628MR-G can be used in various electronic applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Consumer electronics - Industrial equipment - Automotive electronics

Alternative Models

Some alternative models to XC6124E628MR-G include: - XC6124C628MR-G - XC6124D628MR-G - XC6124F628MR-G - XC6124G628MR-G

These models offer similar functionality and characteristics, providing options for different design requirements.

In conclusion, the XC6124E628MR-G is a voltage regulator with a wide input and output voltage range, low dropout voltage, and low quiescent current. It offers stable voltage regulation and is suitable for various electronic applications.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací XC6124E628MR-G v technických řešeních

Sure! Here are 10 common questions and answers related to the application of XC6124E628MR-G in technical solutions:

Question: What is XC6124E628MR-G?
Answer: XC6124E628MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Question: What is the operating voltage range of XC6124E628MR-G?
Answer: The operating voltage range of XC6124E628MR-G is typically between 0.8V and 6.0V.
Question: How does XC6124E628MR-G work?
Answer: XC6124E628MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal.
Question: What is the output type of XC6124E628MR-G?
Answer: XC6124E628MR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor.
Question: What is the typical quiescent current consumption of XC6124E628MR-G?
Answer: The typical quiescent current consumption of XC6124E628MR-G is very low, usually around 1.0µA.
Question: Can XC6124E628MR-G be used in battery-powered applications?
Answer: Yes, XC6124E628MR-G is suitable for battery-powered applications due to its low quiescent current consumption.
Question: What is the accuracy of the voltage detection threshold in XC6124E628MR-G?
Answer: The accuracy of the voltage detection threshold in XC6124E628MR-G is typically ±2%.
Question: Can XC6124E628MR-G be used for overvoltage protection?
Answer: Yes, XC6124E628MR-G can be used for overvoltage protection by setting the detection threshold to a desired voltage level.
Question: Is XC6124E628MR-G suitable for automotive applications?
Answer: Yes, XC6124E628MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Question: What is the package type of XC6124E628MR-G?
Answer: XC6124E628MR-G is available in a small SOT-25 package, which is compact and easy to integrate into various electronic designs.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.