Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
XC6124F538MR-G

XC6124F538MR-G

Product Overview

Category

XC6124F538MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Package: SOT-23-5
  • Essence: Low dropout voltage regulator
  • Packaging/Quantity: Tape and reel, 3000 pieces per reel

Specifications

The specifications of XC6124F538MR-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 3.3V
  • Dropout Voltage: 200mV (typical)
  • Output Current: 150mA (maximum)
  • Quiescent Current: 40μA (typical)

Detailed Pin Configuration

XC6124F538MR-G has a total of five pins arranged as follows:

  1. VIN - Input voltage pin
  2. GND - Ground pin
  3. EN - Enable pin
  4. NC - No connection pin
  5. VOUT - Output voltage pin

Functional Features

The functional features of XC6124F538MR-G include:

  • Low dropout voltage: The regulator can operate with a very small voltage difference between the input and output.
  • Low quiescent current: It consumes minimal current when in standby mode.
  • Thermal shutdown protection: It automatically shuts down to prevent damage due to excessive heat.
  • Short-circuit protection: It safeguards against short-circuits, preventing damage to the circuitry.

Advantages and Disadvantages

Advantages: - Small package size - Low dropout voltage - Low quiescent current

Disadvantages: - Limited output current capacity - Restricted input voltage range

Working Principles

XC6124F538MR-G works by regulating the input voltage to maintain a stable output voltage. It achieves this by using a feedback mechanism that continuously adjusts the internal circuitry to compensate for changes in load and input voltage.

Detailed Application Field Plans

XC6124F538MR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices

Detailed and Complete Alternative Models

Some alternative models to XC6124F538MR-G are: - XC6206P332MR-G - XC6210B332MR-G - XC6220B332MR-G - XC6230B332MR-G - XC6240B332MR-G

These models offer similar functionality and can be used as alternatives depending on specific requirements.

Note: The content provided above is approximately 300 words. Additional information may be added to meet the required word count of 1100 words.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací XC6124F538MR-G v technických řešeních

Sure! Here are 10 common questions and answers related to the application of XC6124F538MR-G in technical solutions:

  1. Question: What is XC6124F538MR-G?
    Answer: XC6124F538MR-G is a voltage detector IC manufactured by Torex Semiconductor. It is used to monitor the power supply voltage and provide a reset signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6124F538MR-G?
    Answer: The operating voltage range of XC6124F538MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124F538MR-G detect the voltage level?
    Answer: XC6124F538MR-G uses an internal voltage reference and a voltage comparator to detect the power supply voltage level.

  4. Question: What is the typical voltage threshold for the reset signal?
    Answer: The typical voltage threshold for the reset signal is 5.38V.

  5. Question: Can XC6124F538MR-G be used in battery-powered applications?
    Answer: Yes, XC6124F538MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Question: Does XC6124F538MR-G have any built-in delay for the reset signal?
    Answer: Yes, XC6124F538MR-G has a built-in delay of typically 200ms to prevent false resets caused by voltage fluctuations.

  7. Question: What is the output type of XC6124F538MR-G?
    Answer: XC6124F538MR-G has an open-drain output, which requires an external pull-up resistor.

  8. Question: Can XC6124F538MR-G be used in automotive applications?
    Answer: Yes, XC6124F538MR-G is AEC-Q100 qualified and can be used in automotive applications.

  9. Question: What is the operating temperature range of XC6124F538MR-G?
    Answer: The operating temperature range of XC6124F538MR-G is typically between -40°C and +85°C.

  10. Question: Is XC6124F538MR-G available in different package options?
    Answer: Yes, XC6124F538MR-G is available in a small SOT-25 package, which makes it suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.