Viz Specifikace pro podrobnosti o produktu.
Encyclopedia Entry: 74VHCT245AFT
Product Overview
Category
The 74VHCT245AFT belongs to the category of integrated circuits (ICs) and specifically falls under the family of voltage high-speed CMOS logic devices.
Use
This IC is commonly used for level shifting and signal buffering in digital systems. It allows bidirectional voltage translation between different logic levels, making it suitable for interfacing between devices operating at different voltage levels.
Characteristics
- High-speed operation: The 74VHCT245AFT offers fast switching times, enabling efficient data transfer between devices.
- Wide voltage range: It supports a wide range of input and output voltage levels, making it versatile for various applications.
- Low power consumption: This IC is designed to consume minimal power, ensuring energy efficiency in electronic systems.
- Robustness: It provides protection against electrostatic discharge (ESD) and other potential hazards, enhancing its reliability.
Package
The 74VHCT245AFT is available in a small form factor package, such as a TSSOP (Thin Shrink Small Outline Package). This package type ensures space-saving integration on circuit boards.
Essence
The essence of the 74VHCT245AFT lies in its ability to facilitate seamless communication between devices operating at different voltage levels, ensuring compatibility and reliable data transfer.
Packaging/Quantity
Typically, the 74VHCT245AFT is supplied in reels or tubes, with each reel or tube containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the manufacturer's specifications.
Specifications
- Supply Voltage Range: 2.0V to 5.5V
- Logic Family: VHCT
- Number of Channels: 8
- Input/Output Compatibility: TTL/CMOS
- Maximum Operating Frequency: XX MHz
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The 74VHCT245AFT features a dual in-line package (DIP) with 20 pins. The pin configuration is as follows:
- Pin 1: Input/Output A0
- Pin 2: Input/Output B0
- Pin 3: Input/Output A1
- Pin 4: Input/Output B1
- Pin 5: Input/Output A2
- Pin 6: Input/Output B2
- Pin 7: Input/Output A3
- Pin 8: Input/Output B3
- Pin 9: GND (Ground)
- Pin 10: Input/Output B4
- Pin 11: Input/Output A4
- Pin 12: Input/Output B5
- Pin 13: Input/Output A5
- Pin 14: Input/Output B6
- Pin 15: Input/Output A6
- Pin 16: Input/Output B7
- Pin 17: VCC (Power Supply)
- Pin 18: OE (Output Enable)
- Pin 19: DIR (Direction Control)
- Pin 20: NC (No Connection)
Functional Features
- Bidirectional Voltage Translation: The 74VHCT245AFT enables bidirectional data transfer between devices operating at different voltage levels.
- Output Enable Control: The OE pin allows the user to enable or disable the outputs, providing flexibility in system design.
- Direction Control: The DIR pin determines the direction of data flow, allowing for versatile signal routing.
Advantages and Disadvantages
Advantages
- Fast switching times facilitate efficient data transfer.
- Wide voltage range compatibility enhances versatility.
- Low power consumption ensures energy efficiency.
- Robust protection against ESD and other hazards improves reliability.
Disadvantages
- Limited number of channels (8) may not be sufficient for certain applications requiring a higher channel count.
- The small form factor package may pose challenges during manual soldering or rework.
Working Principles
The 74VHCT245AFT operates based on the principles of CMOS logic. It utilizes a combination of complementary metal-oxide-semiconductor (CMOS) transistors to achieve bidirectional voltage translation. When the direction control (DIR) pin is set, the IC allows data to flow from the A-side to the B-side or vice versa. The output enable (OE) pin controls the activation of the outputs.
Detailed Application Field Plans
The 74VHCT245AFT finds application in various digital systems where voltage level shifting and signal buffering are required. Some common application fields include:
- Microcontroller Interfacing: It enables communication between microcontrollers operating at different voltage levels.
- Sensor Networks: The IC facilitates data exchange between sensors
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací 74VHCT245AFT v technických řešeních
Sure! Here are 10 common questions and answers related to the application of 74VHCT245AFT in technical solutions:
Q: What is the 74VHCT245AFT? A: The 74VHCT245AFT is a high-speed octal bus transceiver with 3-state outputs, commonly used for bidirectional data transfer between different voltage levels.
Q: What is the operating voltage range of the 74VHCT245AFT? A: The 74VHCT245AFT operates within a voltage range of 4.5V to 5.5V.
Q: Can the 74VHCT245AFT be used for level shifting between different voltage domains? A: Yes, the 74VHCT245AFT can be used for level shifting between different voltage domains, making it suitable for interfacing between devices operating at different voltage levels.
Q: How many bidirectional channels does the 74VHCT245AFT have? A: The 74VHCT245AFT has 8 bidirectional channels, allowing for simultaneous data transfer in both directions.
Q: What is the maximum data transfer rate supported by the 74VHCT245AFT? A: The 74VHCT245AFT supports high-speed data transfer rates up to 200 MHz.
Q: Does the 74VHCT245AFT have built-in protection features? A: No, the 74VHCT245AFT does not have built-in protection features. Additional external circuitry may be required for ESD protection.
Q: Can the 74VHCT245AFT drive capacitive loads directly? A: Yes, the 74VHCT245AFT can drive capacitive loads directly. However, it is recommended to consider the load capacitance and ensure proper signal integrity.
Q: What is the power supply current consumption of the 74VHCT245AFT? A: The power supply current consumption of the 74VHCT245AFT varies depending on the operating conditions but typically ranges from a few milliamperes to tens of milliamperes.
Q: Can the 74VHCT245AFT be used in automotive applications? A: Yes, the 74VHCT245AFT is suitable for automotive applications as it meets the necessary requirements for temperature range, voltage levels, and reliability.
Q: Are there any specific layout considerations for using the 74VHCT245AFT? A: Yes, it is important to follow good PCB layout practices, such as minimizing trace lengths, providing adequate decoupling capacitors, and ensuring proper signal integrity to optimize the performance of the 74VHCT245AFT.
Please note that these answers are general and may vary based on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.