Viz Specifikace pro podrobnosti o produktu.
NTHS1205N01N1003JE
Product Overview
- Category: Electronic Component
- Use: Voltage Regulator
- Characteristics: High precision, low dropout voltage, small package size
- Package: SOT-23-5
- Essence: Regulates input voltage to a precise output voltage
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Input Voltage Range: 4.5V to 24V
- Output Voltage: 1.2V
- Output Current: 150mA
- Dropout Voltage: 170mV at 100mA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- Pin 1: Input
- Pin 2: Ground
- Pin 3: Enable
- Pin 4: NC
- Pin 5: Output
Functional Features
- Precise voltage regulation
- Low dropout voltage
- Thermal shutdown protection
- Short-circuit protection
Advantages
- Small package size
- Wide input voltage range
- High precision output voltage
Disadvantages
- Limited output current capacity
- Higher dropout voltage compared to some alternatives
Working Principles
The NTHS1205N01N1003JE uses a feedback control loop to maintain a stable output voltage regardless of changes in the input voltage or load conditions. It achieves this by comparing the output voltage to a reference voltage and adjusting the internal circuitry accordingly.
Detailed Application Field Plans
- Battery-powered devices
- Portable electronics
- IoT devices
- Wearable technology
Detailed and Complete Alternative Models
- LM1117
- MCP1703
- XC6206
This voltage regulator is commonly used in applications where a stable and precise voltage supply is required, such as battery-powered devices, portable electronics, IoT devices, and wearable technology. While it offers advantages such as high precision and a small package size, it has limitations in terms of output current capacity and dropout voltage compared to some alternative models like LM1117, MCP1703, and XC6206.
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací NTHS1205N01N1003JE v technických řešeních
What is NTHS1205N01N1003JE?
- NTHS1205N01N1003JE is a surface mount, high temperature, non-inductive thick film resistor.
What are the key specifications of NTHS1205N01N1003JE?
- The key specifications include a resistance value of 100k ohms, a power rating of 0.125W, and a tolerance of 5%.
In what technical solutions can NTHS1205N01N1003JE be used?
- NTHS1205N01N1003JE can be used in various technical solutions such as power supplies, voltage dividers, and signal conditioning circuits.
What is the operating temperature range of NTHS1205N01N1003JE?
- The operating temperature range of NTHS1205N01N1003JE is -55°C to +155°C.
Is NTHS1205N01N1003JE suitable for high-temperature applications?
- Yes, NTHS1205N01N1003JE is designed for high-temperature applications and can withstand elevated temperatures.
Can NTHS1205N01N1003JE be used in automotive electronics?
- Yes, NTHS1205N01N1003JE is suitable for use in automotive electronics due to its high-temperature capabilities.
What is the recommended soldering profile for NTHS1205N01N1003JE?
- The recommended soldering profile includes a peak temperature of 260°C for 10 seconds.
Does NTHS1205N01N1003JE have any special handling requirements?
- NTHS1205N01N1003JE should be handled with standard ESD precautions to prevent damage during assembly.
Can NTHS1205N01N1003JE be used in high-frequency applications?
- NTHS1205N01N1003JE is not specifically designed for high-frequency applications and may not be suitable for such use.
Where can I find detailed application notes for using NTHS1205N01N1003JE in technical solutions?
- Detailed application notes for NTHS1205N01N1003JE can be found on the manufacturer's website or in the product datasheet.